USER’S MANUAL
Package Contents: NexStar CX 3.5” SATA to SuperSpeed USB 3.0 External Hard Drive Enclosure 1 2 3 4 5 6 3.5" NexStar CX HDD Enclosure Power Adapter USB 3.0 Cable (3ft A to B Cable) Enclosure Stand User’s Manual Installation Screws 1 2 4 3 5 6 USER’S MANUAL TRADEMARKS MS-DOS, Microsoft, Windows NT/2000/XP/Vista/7 are trademarks of Microsoft Corporation. Apple, Macintosh and Mac are trademarks of Apple Computer. NexStar is a registered trademark of Vantec Thermal Technologies.
Table of Contents: 1. Introduction ................................................................................................................02 2. Specifications/Features..................................................................................... 03 3. System Requirements ..........................................................................................04 4. Parts Layout .................................................................................................................
1. Introduction: Vantec introduces the NexStar® CX 3.5" SuperSpeed USB 3.0 External Hard Drive Enclosure, ideal for anyone in need of storing and transferring large amounts of data. Integrated with the latest USB 3.0 technology, performance is increased by 10 fold offering maximum speeds of up to 5 Gbps. In addition, the sleek aluminum casing not only protects the drive from overheating but also provides sound dampening qualities to minimize vibrations. The Vantec NexStar® CX 3.5" SuperSpeed USB 3.
2. Specifications/Features: NexStar CX SuperSpeed SATA to USB 3.0 External 3.5” HDD Enclosure: Features: • Maximum Transfer Rates Up to 5 Gbps With USB 3.0 • Maximum Transfer Rates Up to 480 Mbps With USB 2.0 • Backward-Compatible with USB 2.0 or 1.1 • Hi-Quality Shielded USB 3.
3. System Requirements: Microsoft Windows XP/Vista/7 Mac OS 10.4 & greater 1. For USB 2.0 speeds, the system must 1. For USB 2.0 speeds, the system must support USB 2.0 specifications support USB 2.0 specifications 2. For USB 3.0 speeds, the system must 2. For USB 3.0 speeds, the system must support USB 3.0 specifications support USB 3.0 specifications NOTE : USB 3.0 products will work with a USB 2.0 ports however they will only function at USB 2.0 specifications.
4. Parts Layout: NexStar CX SuperSpeed SATA to USB 3.0 External 3.
5. Installation: NexStar CX SuperSpeed SATA to USB 3.0 External 3.5” HDD Enclosure: 5.1. Hardware Installation: Preparing the hard drive: (1) If there are jumper settings on the hard drive, please set the hard drive jumpers to MASTER or SINGLE DRIVE ONLY. Please refer to the hard drive manufacturer’s documenttation for further information on your jumper settings. Preparing the NexStar CX: (1) Remove the side of the NexStar CX SuperSpeed wih the power and USB connection ports.
Installing the hard drive to the NexStar CX SuperSpeed: (1) Connect the SATA and power connector to the hard drive as pictured. ( figure 5.1-B ) ( figure 5.1-B ) (2) Align the hard drive mounting holes with the holes on the back of the drive caddy and secure the hard drive with the screws provided. ( figure 5.1-C ) ( figure 5.1-C ) (3) Insert the drive caddy back into the aluminum housing. Be sure to reconnect the LED cable before closing the unit.
NOTE : Connecting the NexStar CX to your computer: (1) Connect the type (B) USB connector to the NexStar CX SuperSpeed and the type (A) USB connector to an available USB port on your system. ( figure 5.1-E ) (2) Connect the power cable to the NexStar CX SuperSpeed and plug the cable into an available outlet. ( figure 5.1-E ) (3) Turn on the NexStar CX SuperSpeed via the power switch. ( figure 5.
6. Disconnecting the NexStar CX SuperSpeed: NexStar CX SuperSpeed USB 3.0 External 3.5" HDD Enclosure: Windows XP/Vista/7: Mac OS: (1) Make sure all operations using the hard drive within the NexStar CX SuperSpeed has ceased. (2) Close any windows and programs pertaining to the NexStar CX SuperSpeed. (3) Double click the green “Safely Remove Hardware” icon in the system tray and select [Safely Remove USB Mass Storage Device]. Select the device you wish to remove and click on [Stop].
7. Creating A New Partition: For Windows XP/ Vista/7 Users: NOTE : (1) Right click on “My Computer” and choose Most hard drives should come with a CD that includes an installation program. If not, a download should be available from the manufacturer's website. The best way to partition a new hard drive is by using the manufacturer’s program. Please refer to your hard drive’s documentation for further information on formatting or partitioning the hard drive. “Manage”.
(6) Follow the directions of the wizard. The recommended type is “primary” and 1 the recommended file system is “NTFS.” VANTEC Please note that Windows® XP/Vista/7 limits FAT32 partitions to only 32GB. ( figure 7-C ) 2 (7) Windows Disk Management will format and partition the disk according to your settings. Please allow some time for the 3 partition and format to complete. ( figure 7-C ) ( figure 7-D ) (8) Once completed, your drive will appear in My Computer or in Window Explorer.
Formatting for Mac Users (1) Connect the device to the computer. Once NOTE : connected please turn on the device. If the hard drive will not mount on your system, format the drive into FAT32 or NTFS partition through a PC system first. Once formatted, connect the NexStar Enclosure to your Mac and run the Disk Utility Tool again. The Disk Utility Tool should be able detect the hard drive and allowing you to format or mount the hard drive. (2) Select Utilities from the Go menu in the Finder menu bar.
8. Warranty: The NexStar CX SuperSpeed comes with a 1 year limited warranty ( 90 day parts ) . If your unit should become defective within that time frame, please go to www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty. Please check the contents of the unit to make sure you received all parts. Also, check for any cosmetic flaws.
