2.5" SATA to USB 3.
Package Contents: 2.5" SATA to USB 3.0 & eSATA External Hard Drive Enclosure： 1 2 3 4 5 2.5” NexStar 3 SuperSpeed USB 3.0 & eSATA Enclosure USB 3.0 Cable Installation Screws eSATA Cable User’s Manual 1 2 Note: When using eSATA, please make sure to connect the eSATA cable first before connecting the Y-cable for power. 3 4 5 U SER ’S MA N U A L TRADEMARKS MS-DOS, Microsoft, Windows NT/2000/XP/Vista/7 are trademarks of Microsoft Corporation. Apple, Macintosh and Mac are trademarks of Apple Computer.
Table of Contents: 1. Introduction ................................................................................................................02 2. Specifications/Features NexStar 3 Superspeed External 2.5” HDD Enclosure .................................................... 03 3. System Requirements ..........................................................................................04 4. Parts Layout NexStar 3 Superspeed External 2.5” HDD Enclosure ..............................................
1. Introduction: Form and functionality collide with style in the NexStar 3 SuperSpeed USB 3.0 & eSATA External Hard Drive Enclosure from Vantec. With its mirror finish and sleek curves, the Vantec NexStar 3 SuperSpeed stands out from the crowd. The sturdy drive cage protects your hard drive while the aluminum case effectively draws away the heat, protecting your drive from overheating. Integrated with the latest USB 3.
2. Specifications/Features: 2.5" SATA to USB 3.0 & eSATA External Hard Drive Enclosure (Supports 7mm, 9.5mm, 12.5mm HDD/SSD) Features: Attractive Mirror Finish Design Aluminum Casing Cools Down Your Hard Drive Maximum Transfer Rates Up to 5 Gbps w/USB 3.0 Maximum Transfer Rates Up to 3Gbps w/eSATA Maximum Transfer Rates Up to 480 Mbps w/USB 2.0 Easily Add Storage to Any System with USB 2.0, 3.0 or eSATA Backwards-Compatible with USB 2.0 Hi-Quality Shielded USB 3.
3. System Requirements: Microsoft Windows XP/Vista/7 Mac OS 10.4 & greater 1. For USB 2.0 speeds, the system must 1. For USB 2.0 speeds, the system must support USB 2.0 specifications support USB 2.0 specifications 2. For USB 3.0 speeds, the system must 2. For USB 3.0 speeds, the system must support USB 3.0 specifications support USB 3.0 specifications 3. USB-Equipped or eSATA System 3. USB-Equipped or eSATA System NOTE : USB 3.0 products will work with a USB 2.
4. Parts Layout: eSATA USB 2.5" SATA to USB 3.
5. Installation: 2.5" SATA to USB 3.0 & eSATA External Hard Drive Enclosure 5.1. Hardware Installation: Preparing the NexStar 3: (1) Remove the side of the NexStar 3 SuperSpeed with the power and USB connection ports. (2) Carefully slide out the hard drive caddy. ( figure 5.
Installing the hard drive in the NexStar 3 SuperSpeed: (1) Connect the SATA and power connector to the hard drive as pictured. ( figure 5.1-B ) ( figure 5.1-B ) (2) Align the hard drive mounting holes with the holes on the back of the drive caddy and secure the hard drive with the screws provided. ( figure 5.1-C ) ( figure 5.1-C ) (3) Insert the drive caddy back into the aluminum housing. When reinserting the caddy, be sure to align the caddy under the screw rails.
NOTE : Connecting the NexStar 3 to your computer: USB 3.0 For new hard drives, you will need to initialize and partition your hard drive before it will appear in Windows Explorer or on your Mac desktop. Please refer to your hard drive manufacturer's documentation or read the"Creating a New Partition" section of this manual. (1) Connect the type (A) USB connector to the NexStar 3 SuperSpeed and the type (A) USB connector to an available USB port on your system. ( figure 5.
6. Disconnecting the NexStar 3 SuperSpeed: NexStar 3 SuperSpeed USB 3.0 External 3.5" HDD Enclosure: Windows XP/Vista/7: Mac OS: (1) Make sure all operations using the hard drive within the NexStar 3 SuperSpeed has ceased. (2) Close any windows and programs pertaining to the NexStar 3 SuperSpeed. (3) Double click the green “Safely Remove Hardware” icon in the system tray and select [Safely Remove USB Mass Storage Device]. Select the device you wish to remove and click on [Stop].
7. Creating A New Partition: For Windows XP/ Vista/7 Users: NOTE : (1) Right click on “My Computer” and choose Most hard drives should come with a CD that includes an installation program. If not, a download should be available from the manufacturer's website. The best way to partition a new hard drive is by using the manufacturer’s program. Please refer to your hard drive’s documentation for further information on formatting or partitioning the hard drive. “Manage”.
(6) Follow the directions of the wizard. The recommended type is “primary” and 1 the recommended file system is “NTFS.” VANTEC Please note that Windows® XP/Vista/7 limits FAT32 partitions to only 32GB. ( figure 7-C ) 2 (7) Windows Disk Management will format and partition the disk according to your settings. Please allow some time for the 3 partition and format to complete. ( figure 7-C ) ( figure 7-D ) (8) Once completed, your drive will appear in My Computer or in Window Explorer.
Formatting for Mac Users (1) Connect the device to the computer. Once NOTE : connected please turn on the device. If the hard drive will not mount on your system, format the drive into FAT32 or NTFS partition through a PC system first. Once formatted, connect the NexStar Enclosure to your Mac and run the Disk Utility Tool again. The Disk Utility Tool should be able detect the hard drive and allowing you to format or mount the hard drive. (2) Select Utilities from the Go menu in the Finder menu bar.
8. Warranty: The NexStar 3 SuperSpeed comes with a 1 year limited warranty ( 90 day parts ) . If your unit should become defective within that time frame, please go to www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty. Please check the contents of the unit to make sure you received all parts. Also, check for any cosmetic flaws.
