4-Port FireWire 400 PCI Host Card User Manual Model: UGT-FW050 All brand names and trademarks are properties of their respective owners. www.vantecusa.
Features and Benefits z VIA VT6306 chipset z PCI 32-bit 33MHz Interface z Compliant IEEE 1394-1995, 1394a (rev. 1.1) and OHCI Interface Specification 1.
Package Contents z 1 x 4-Port FireWire 400 PCI Host Card Adapter z 1 x User’s Manual z 1 x 1394a DV Cable (6-pin to 4-pin) Hardware Description Before installing the 4-Port FireWire 400 PCI Host Card, please see the photo below highlighting the available IEEE 1394aports of the card. Note: The Internal Port (P1)) shares with first External Port (P2).
same time. Hardware Installation 1. Turn Off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCI slot. 4. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly. 5. Replace the slot bracket’s holding screw to secure the card. 6. Replace the computer cover and reconnect the power cord.