5-Port USB 2.0 PCI Host Card User Manual Model: UGT-PC210 All brand names and trademarks are properties of their respective owners. www.vantecusa.
Features and Benefits z VIA VT6212 chipset z PCI 32-bit 33MHz Interface z Compliant with USB specification revision 2.0 z Backward compatible with USB 1.1 Specification z Hot-swapping feature allows you to connect/disconnect devices without first turning system off z Supports high-speed (480Mbps), full-speed (12Mbps), and low-speed(1.5Mbps) data transfer modes for simultaneous operation of multiple USB 2.0/1.
Package Contents z 1 x 5-Port USB 2.0 PCI Host z 1 x User’s Manual Card System Requirements z Windows® 2000 SP4 / XP SP1 or later / Server 2003 / Vista z Available PCI slot Hardware Description Before installing the 5-Port USB 2.0 PCI Host Card, please see the photo below highlighting the available USB ports of the card. Note: The Internal Port (UJ5) shares with first External Port (UJ1).
Hardware Installation 1. Turn Off the power to your computer. 2. Unplug the power cord and remove your computer’s cover. 3. Remove the slot bracket from an available PCI slot. 4. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly. 5. Replace the slot bracket’s holding screw to secure the card. 6. Replace the computer cover and reconnect the power cord.
Windows® Server 2003/Vista has built-in driver support for this controller. Just install the board and Windows will automatically detect and install the correct drivers for it. No additional driver is necessary. To Verify Driver Installation 1. Right click My Computer, then click Manage. Click Device Manager. 2. Double click Universal Serial Bus controllers option. - USB Root Hub (USB 2.
UGT-PC210 Page 6
