2-Port Parallel PCIe Host Card User Manual Model: UGT-PCE20PL All brand names and trademarks are properties of their respective owners www.vantecusa.
Contents Features and Benefits............................................................. 3 System Requirements ............................................................ 3 Package Contents................................................................... 3 Hardware Installation ............................................................ 3 Driver Installation ..................................................................
Features and Benefits Compliant with PCI Express Base Specification 1.1 Supports x1, x4, x8, x16 PCI Express Add two IEEE 1284 Parallel Ports on system Supports Standard Parallel Port (SPP), Enhanced Parallel (EPP) & Enhanced Capability Port (ECP) Faster data rates up to 1.
3. Remove the slot bracket from an available PCIe slot. 4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly. 5. Replace the slot bracket’s holding screw to secure the card. 6. Secure the computer cover and reconnect the power cord. Driver Installation 1. Place the Driver CD into the CD-ROM drive. Click the Start button on the taskbar and click Run. Type “D:\UGT-PCE20PL\ Windows\Setup.exe”.