User manual

Device Manager.
2. When the Device Manager window appears, click on the next to
other device to expacnd the list. Right-click”RAID Controller”
and select Updated Driver Software…
3. When the Update Driver Software appears, select “Browse my
computer for driver software”
4. When the next window appears, insert the driver CD into the
computer’s optical drive, type D:\
UGT-ST420R\Win7 32-bit
( substitute whatever drive letter is appopriate), and then click
Next.
5. When the next window appears, click Close to complete the
installation.
UGT‐ST320R Page17
F
For Windows® 7-x64
or New Installation
1. Setup the RAID Array prior to Windows installation.
2. At the Windows Setup screen, press Load Driver to install the
driver.
3. Insert the CD driver into your CD-ROM Drive, please select
Silicon Image SiI 3512 SATARaid Controller