User guide

5
-Height of upright and length of crossbars are vehicle specic.
Please refer to page 3 for correct measurements.
-Front bar should be positioned 6” behind front doors to prevent wind noise/rattle.
-Refer to chart on page 3 for correct upright and bar positioning.
-For Ford Econoline 92-present turn the mounting plate so the hole are slightly
higher.
-Except for the Passenger side barn door. Flip the mounting plate 180° so
doors can open freely.
180°
Chevy Express 96-Present
GMC Savana 96-Present
Secure the mounting plate to the
“top” holes of the upright mounts.
Chevy Van GMC Up & Till 96
Dodge All Years
Dodge Sprinter 2002-2006
Ford All Years
Secure the mounting plate to the “bottom”
holes of the upright mounts.