c *Thank you for choosing our shower panels, We bring you better shower experience *Please read this instructions carefully before you install our product *Please DO ASK certified plumber to install our product
Installation Instructions & Owner s Guide
THANK YOU FOR CHOOSING OUR SHOWER PANEL Please take few minutes to read the manual before you begin installation. Our shower panel is made for a quick and simple installation. We strongly recommend you to ask thecertified plumber to install the shower panel . However, if you encounter a problem after a proper installation, do not hesitate to contact your certified dealer. ALWAYS OBEY THE PLUMBING CODE AS THE BUILDING CODE IN FORCE. For your protection please always wear safety glasses.
LIST OF TOOLS AND EQUIPMENT TO INSTALLATION NECESSARIES Plastic Peg (supplied Support steel wall plates supplied Screw supplied Sealing rings supplied Hose Clamp option Drill Pen Wrench Level Key to pipe Tape measure Hacksaw Other tools may be required by the type of existing facility PRIOR TO REVISE THE INSTALLATION Please check that the wall which supports the shower panel is capable to support a load of 12KG 25LB Make sure that the shower panel is installed at a desired location and no harm function to
Preparation for installation The tools for installing a shower panel includes the those on the right one person and an assistant are recommended for an easy installation. Silicon is necessary for installing this shower panel,however you may glue the panel on the wall with silicon. Attention this shower panel is designed for flat wall mounting.
JOINING YOUR SHOWER PANEL 1 Open the box and take out the shower panel .
INSTALLATION INSTRUCTION OF YOUR SHOWER PANEL MAKE SURE THAT YOUR HOT AND COLD WATER VALVES ARE IN CLOSED POSITION BEFORE ANY WORK ON THE SYSTEM OF PLUMBING STEP 1 Preparation of your plumbing for new construction or existing 1 For new construction the ends must be size 1 2 ' and ? oriented 90 and face down Otherwise the joints of shower panel will have high chance to be folded and the water needed for the proper function of your shower panel is overflowed The risk of pipe broken is greatly increased and
Photo just for installation reference TIP FOR THE DRILLING OF CERAMICS MARBLE AND OTHER STONE USE A LOCK TYPE OF MASONRY D Before hanging the shower panel please check the strength of strong supports shooting on each of them E One person holds the shower panel the other makes the connection of the hose Do not over tighten the nuts Once the connections are made and shower panel is installed open valves of main water and make sure it s no leak
FAST INSTALLATION TIPS Step 1 Measure the distance between two supports of the backside at the back see pic 1 Step 2 Drill holes in the wall for the two brackets according to the distance that you have measured in the first step Step 3 Insert plastic pegs then screwing the screws into the plastic pegs while holding the bracket see pic 2 Step 4 Assemble the shower holder hand shower top rain shower and connect with the main body see pic 3 Hand shower Top rain shower Step 5 Mount the shower panel with att
NORMAL FUNCTIONS OF OUR SHOWER PANELS (Different panels have different function, not include all) 1.Top rain shower. (See Figure 1) Figure 1 2.Waterfall shower. (See Figure 2) 3.Body shower. (See Figure 3) 4.Hand shower. (See Figure 4) 5.Spout.
Cleaning Recommendations Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality To avoid damage it is necessary to use some caution when cleaning Damage caused by improper treatment is not cov ered under the warranty Cleaning Materials for Faucets and Showers • To remove lime scale use only products made specif cally for that purpose Always follow the manufacturer s instructions when using • Do not use cleaners th
Scale removal & Technical data The Spray channels of overhead shower are protected by the self-cleaning system If scale deposits are noticed in the spray channels turn the water on lightly and tub the spray channels with a finger and a sponge Operating pressure: Max 102psi: Recommended pressure: 60-80psi: Max Hot water temperature: Recommended hot water temperature: 176F: Flow rate 70 psi: Hand shower: 2 gpm: <1 gpm each: Protection against back siphonage is provided by check valves in the hot and