VT-TABLET-5081S User Manual Product Version: 1.0 Date: 2021/11/22 For any question, please contact Chengdu Vantron Technology, Ltd. Copyright © Vantron Technology, Ltd. All rights reserved.
Change History This document describes VT-TABLET-5081S briefly and is intended for all readers. This table describes the version and release date. No. Version Date Description Author 1 1.0 2021/11/22 First release.
Foreword Copyright While all information contained herein have been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual.
Limitation of Liability/Non-warranty For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty. VT-TABLET-5081S should be installed, debugged and maintained by professionals. The outside antennas are not permitted to be installed or to be changed by non-professionals.
Safety Instructions for Power Cables and Accessories Use Proper power source only. Start only with power source that satisfies voltage label and the voltage necessary according to this manual. Please contact technical support personnel of Vantron for any uncertainty about the requirements of necessary power source. Use tested power source.
Contents 1. OVERVIEW ................................................................................................................................................................................ 1 1.1 Introduction ...................................................................................................................... 1 1.2 Order Information ............................................................................................................. 2 2.
VT-TABLET-5081S User Manual 1. Overview 1.1 Introduction Thank you for choosing Vantron. It is our commitment to provide our valued customers with the embedded devices equipped with the state-of-the-art technology and product services. Tablet enables interaction between operators/users and applications, connects industrial control products such as wireless, transducer, built-in battery, storage, etc. Tablet adopts a display and supports units such as touch screen, keyboard, audio, sensors, etc.
VT-TABLET-5081S User Manual 1.2 Order Information Table 1-1 is an example of order information. Table 1-1 Order information 5VDC Input ,8 '' IPS TFT LCD, RK3368, Quad-core 1.4 GHz, OTG VT-TABLET-5081S TYPEC USB, Two SPEAKERS, WIFI a/b/g/n/ac BT5.0,LTE B48,Wireless Charge etc.
VT-TABLET-5081S User Manual 2. VT-TABLET-5081S Hardware Instructions 2.1 Product Appearance Figure 2-1 and Figure 2-2 show the views of our product.
VT-TABLET-5081S User Manual Figure 2-2 Back view 4
VT-TABLET-5081S User Manual 2.2 Specifications Table 2-1 shows the specifications. Table 2-1 Specifications CPU RK3368+RK808-B, Quad-core ARM Cortex-A55 (up to 1.4GHz) Processor SYS Mem LPDDR3-1333 512M*32b Flash eMMC 32GB Display 8” LCD, Resolution1280x800. Color depth: 16.7M. brightness : Typical 250 cd/m2 TP Capacity Touch screen, support 5 point and double tap to wake up. Media Camera Front Camera, 5MP, MIPI 2-lanes Audio Support 2x3.
VT-TABLET-5081S User Manual Operation -0C ~ +40 ℃ Temp. Storage -20C ~ +60 ℃ Temp. 2.3 Buttons Power Button Power off the device and on/off the screen. Volume buttons You can use volume up and down buttons to adjust the volume and use the down button to download the software. Never apply excessive pressure to a button, or you may cause damage which is not covered under the warranty. 2.4 Interface Description 2.4.1 USB OTG (Type C) With a standard Type C USB 2.
VT-TABLET-5081S User Manual 2.4.3 Speakers 2x1w speakers is in the tablet。It can supply comfortable audio for the user. 2.4.4 FM Support FM function, Frequency 87~108MHz. 2.4.5 Wi-Fi and Bluetooth The tablet supports 802.11 a/b/g/n/ac Wi-Fi and BLE 5.0 With 2 internal antennas, both Wi-Fi and BLE can achieve better performance. 2.4.6 LTE The tablet supports LTE B48 with 4 internal antennas, support Cat 6. 2.5 Packing List Table 2-2 describes the packing information. Table 2-2 Packing list No.
VT-TABLET-5081S User Manual 3. Software Instruction VT-TABLET-5081S has been pre-loaded with Android image, so the system can run Android tool to update the system image.
VT-TABLET-5081S User Manual 4. Device instructions 1), Power supply: This device only supports 5V DC input. Please use the adapter provided with the DCJack. 2), Typec usb supports both host and client modes. 3), Enter the download mode method: 1) Hold down the download key (the middle of the three keys) on the board. 2) Plug in the 5V adapter. 3) Plug in the USB cable. Once the computer recognizes usb and go to download mode , you can release the button and download software.
VT-TABLET-5081S User Manual 5. Tips Waste Disposal It is recommended to disassemble the device before abandoning it in conformity with local regulations. Please ensure that the abandoned batteries are disposed according to local regulations on waste disposal. Do not throw batteries into fire (explosive) or put in common waste canister.
VT-TABLET-5081S User Manual Pay attention to caution signs. Caution signs in this manual remind of possible danger. Please comply with relevant safety tips below each sign. Meanwhile, you should strictly conform to all safety tips for operation environment. Notice Considering that reasonable efforts have been made to assure accuracy of this manual, Vantron assumes no responsibility of possible missing contents and information, errors in contents, citations, examples, and source programs.
VT-TABLET-5081S User Manual 6. FCC Warning statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
VT-TABLET-5081S User Manual 7. RF Exposure Information(SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.
VT-TABLET-5081S User Manual Appendix A: How to Contact Us If you have any problem or want to know more about our products, visit www.vantrontech.com or contact us. US Office: Vantron Technology, Inc. Address: 440 Boulder Court, Suite 300, Pleasanton, CA 94566, USA Tel: 925-621-8758 Email: sales@vantrontech.com China Office: Chengdu Vantron Technology, Ltd Address: 6th Floor, 1st Building, No.
