User Manual

- 6 -
Or you will need a circuit tester or multimeter to test if a fuse is ignition
switched or always on.
If you need to find an ignition switched fuse, put the key in the vehicle,
find the fuse which is not lit up while the car is off, and test it by turning
the car on to see if it lights up.
If your kit requires constant power, turn off the car and remove the key
to see which fuse slots stays lit on.
III - Identify your fuse type
Next you need to identify the type of fuse as depicted above.
IV - Connect to car fuse box
1. Once you've determined which fuse slots you need to use for your
hardwiring kit you can crimp the red wire of your hardwire kit onto
the Add-A-Fuse.
N0. Amps. Circuits Protected
33 20A Rear Left Power Window
34 — Not Used
35 7.5A ACC Radio
36 10A HAC
37 7.5A Daytime Running Light
38 30A Front Wiper
3
4
30
10
Low-Profile
Mini Fuse
ATO (regular)
Fuse
Mini Fuse Micro2
Fuse