Manualshelf

User Manual

ManualsBrandsVANTRUE ManualsCar & Vehicle ElectronicsN2 Uber Dual Dash Cam, 1080P Inside and Outside Dual Dash Camera, 1.5 inches LCD, Near 360 Degree Wide Angle Lyft Dual Car Cam with Parking Mode, Motion Detection, Front Camera Night Vision
11121314151617181920
to stock factory settings.
-Firmware Version: Press OK to check the current firmware version.
Press the MENU button to exit and complete the setup.
Note: To use the GPS function requires the purchase of an extra
GPS mount for the camera.
-GPS Setup: Default is OFF. Press OK to toggle it ON/OFF.
-GPS Time Calibration: Default is OFF. Press OK to toggle it ON/OFF.
When activated, the camera will auto update to GMT/UTC time.
-GMT Setup: Default is 0. Press OK and select from -11 to +12. If you
are using the GPS with time calibration on, please adjust the value
to your local time zone.
-Speed Unit: Default is MPH. Press OK to select either KM/H or MP/H.
Press the MENU button to exit and complete the setup.
C. GPS setup
Review and delete images/videos stored in the Normal/Event folder.
-Normal: Standard images or videos recorded.
-Event: Critical event videos detected by G-Sensor activity or
manually locked by user.
D. Files
Open the MENU interface, navigate to“System Setup”>“Time
Setup”, and press the OK button to set the date/time. Navigate
UP or DOWN to select date and time values. Press OK to confirm
and proceed. To finish setup, just press the MENU button to exit.
Note: Date format is YYYY/MM/DD with the time in 24 hour format.
4.3 Set Date/Time
- 10 -