User Manual

. . . . .
Connecting to the Network
29
CONNECTING TO THE NETWORK
After installing the CompactRAN GSM/CDMA base station on the pole wall, you
need to connect the GPS, RX and TX antennas to the CompactRAN GSM/CDMA
base station (
Figure 4-8 ) and then connect the CompactRAN GSM/CDMA base
station to the power supply and the network.
Figure 4-8. CompactRAN Antenna Connectors
1. Connect the TX antenna.
2. Connect the RX antenna.
3. Connect the GPS antenna.
Caution: The antennas should be connected before the Service
Enclosure is powered on; otherwise, damage may
result.
4. Connect the backhaul using the modem inside the Service Enclosure.
5. Connect to the power source.
6. Open Service Enclosure and turn on the power switch (
Figure 4-1 ).
Status LED
TX Antenna RX Antenna
GPS Antenna