MR 750 Instruction Manual

GETTING STARTED
Vapamore
if over pressure or over temperature is detected.
!
!
!
!
GO TO VAPAMORE.COM TO SEE THE MR-750 OTTIMO INSTRUCTIONAL VIDEO
CORD HOOKS
Once unpacked the only items that need to be installed are the cord hooks and the
storage basket. All the necessary tools and hardware are included to install these items.
Fig.1
STORAGE BASKET
Fig.2
The basket is secured to the main steamer body using
the 4 supplied Allen head style screws and rubber
washers. Align the basket screw hole locations and
with the rubber washer betwwen the basket and the
steamer housing, insert the Allen head screws loosely
until all screws are in place. Once all screws are in place
(Fig.2)
There are two supplied cord hooks that are mounted
by threading the cord hooks onto the threaded studs
located on the back of the steamer housing. The cord
hooks rotate by pulling outward from the steamer
then twisting to rotate. Use this rotate function to
easily remove the power cord and to position the
hooks for cord storage. Use the Velcro cord strap to
secure the cord during transport. (Fig.1)
!
If the storage basket is not being installed make sure to use the 4 supplied
Allen head screws to plug the storage basket mounting holes in the steamer housing.
This will prevent water or debris from entering the steamer housing.
!
operation. Do not tip or tilt the steam cleaner during use.
The Ottimo
Allen
Screw
Storage
Basket
Rubber
washer
machine to cool down before removing tank cap or when changing accessories.
Cord
Hook