Installation Guide

ManualsBrandsVaraluz ManualsOtherSoho 6-Light Hammered Ore Chandelier with Brown Tint Ice Glass

Table Of Contents

Chandelier

Lámpara colgante

Item #126C06

Artículo #126C06

To Begin/Para Comenzar

WARNING: Review important safety instructions on second page

before installation. Check to make sure you have the following tools:

ADVERTENCIA: Revise las instrucciones importantes de seguridad en

la segunda página. Asegúrese que tiene las siguientes herramientas:

Questions, problems, missing parts? Contact our Customer Care Center: 1-702-792-6900

Tiene preguntas, problemas, o faltan partes? Comuníquese con nuestro centro de Atención al Cliente: 1-702-792-6900

Electrical tape

Cinta aislante

Safety glasses

Lentes de protección

Step ladder

Escalera de tijera

Soft cloth

Tela de material suve

Wire cutters

Cortacables

Pliers

Alicate

Flathead screwdriver

Destornillador plano

Phillips screwdriver

Destornillador de estrella

Wire strippers

Pelacables

Required

Necesario

Helpful

Útil

Included Hardware

Partes incluidas

Nipple (1)

Buje roscado (1)

Hickey plate (1)

Placa de refuerzo (1)

Lock washer (2)

Arandela de freno (2)

Finial (1)

Tuerca decorativa (1)

Screw collar loop

with retaining ring (1)

Argolla roscada con

anillo de retención (1)

Ground screw, green (1)

Tornillo a tierra, verde (1)

Mounting screw (2)

Tornillo de montura (2)

Hex nut (2)

Tuerca hexagonal (2)

Wire nut (2)

Cono aislante para

empalmes(2)

Speedlink (2)

Eslabón adaptable (2)

Page 1 of 4

Página 1 de 4

100-watt medium base

lightbulb (6)

Bombilla de base mediana

de 100 vatios (6)

Glass shade fastener (36)

Perno para fijar las

pantallas de vidrio (36)

Wood screw (4)

Tornillo para madera (4)

Summary of content (4 pages)

PAGE 1
Item #126C06 Artículo #126C06 Chandelier Lámpara colgante To Begin/Para Comenzar WARNING: Review important safety instructions on second page before installation. Check to make sure you have the following tools: Required Necesario Helpful Útil ADVERTENCIA: Revise las instrucciones importantes de seguridad en la segunda página.
PAGE 2
Safety Instructions Instrucciones de seguridad WARNING: FOR YOUR PROTECTION AND SAFETY - Carefully read and understand the information given in this manual before beginning the assembly and installation. Failure to do so could lead to electric shock, fire or other injuries which could be hazardous or even fatal. 1. All electrical connections must be in agreement with local codes, ordinances or the national electric code (NEC).
PAGE 3
Fixture Installation/Instalación del Artefacto 1. Attach hickey to inside of junction box using four wood screws (1). Make sure screws pass into surface where junction box is attached. Screw nipple into hickey to point indicated (1A). Add one lock washer and one hex nut to nipple as shown (1B). 2. Adjust chain to length desired. Add one speedlink to each end of chain. Ajuste la cadena a la longitud deseada. Coloque un eslabón adaptable en cada punta de la cadena. 1A.
PAGE 4
9. Install glass shades. Pass glass fasteners through holes in shade and screw into rod. 10. SET SCREW TORNILLO DE AJUSTE Instale las pantallas de vidrio. Pase los pernos por los agujeros en la pantalla y atornillelos en la varilla. Level the shades. Unscrew set screw until shade rotates freely and rotate shade 1/4 turn. Level the shade and tighten the set screw. 11. Install finial on bottom of fixture. Instale la tuerca decorativa en la parte inferior del artefacto. Nivele las pantallas.