Use and Care Manual

TECHNICAL DATA
VAR-39
VARATHANE
®
PREMIUM FLOOR FINISH (450 VOC)
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 877∙385∙8155
www.rustoleum.com
Form: GDH-603
Rev.: 120821
PHYSICAL PROPERTIES
PREMIUM FLOOR FINISH
Resin Type
Oil Modified Polyurethane
Pigment Type
Amorphous Precipitated Silica
Solvents
Mineral Spirits
Weight
Per Gallon
7.3-7.6 lbs.
Per Liter
0.87-0.91 kg
Solids
By Weight
45.0-50.5%
By Volume
38.0-42.0%
Volatile Organic Compounds
450 g/l (3.75 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1 mil
(25µ)
Wet Film to Achieve DFT
(unthinned material)
2 mils
(50µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
500-600 sq. ft./gal.
(12.3-14.8 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
2 hours
Recoat
4 hours
Light Use
24 hours
Normal Use
3 days
Shelf Life
3 years
Flash Point
<113° F (45°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.