Specification

TECHNICAL DATA
VARATHANE
®
CRYSTAL CLEAR POLYURETHANE
Rust-Oleum Corporation Form: GDH-516
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 060217
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
]PHYSICAL PROPERTIES
PH
Physical Properties
Aerosol Brush Goods
Resin Type
Urethane Modified Acrylic Acrylic Modified Urethane
Pigment Type
Microcrystalline Silica Microcrystalline Silica
Solvents
Glycol Ethers, Water Glycol Ethers, Water
MIR
0.85 Max NA
Fill Weight
11.25 ounces NA
Weight
Per Gallon
NA 8.5 lbs.
Per Liter
NA 1.02 kg
Solids
By Weight
NA 27.4%
By Volume
NA 25.7%
Volatile Organic Compounds
NA <250 g/l (2.08 lbs./gal.)
Wet Film to Achieve DFT
(unthinned material)
Varies depending on surface type
and porosity
Varies depending on surface type and
porosity
Practical Coverage at Recommended DFT
(assumes 15% material loss)
20-25 sq.ft./can
(1.8-2.3 m
2
/can)
400-500 sq.ft./gal.
(37.2-46.5 m
2
/gal.)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes 30 minutes
Recoat
1 hour 2 hours
Light Use
24 hours 24 hours
Shelf Life
3 years 3 year
Flash Point
-42°F (-41°C) 167°F (75°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.