Use and Care Manual

TECHNICAL DATA
VAR-34
VARATHANE
®
CRYSTAL CLEAR POLYURETHANE
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 800∙901∙0411
www.rustoleum.com
Form: GDH-516
Rev.: 052621
PHYSICAL PROPERTIES
Aerosol
Brush Goods
Resin Type
Urethane Modified Acrylic
Acrylic Modified Urethane
Pigment Type
Microcrystalline Silica
Microcrystalline Silica
Solvents
Glycol Ethers, Water
Glycol Ethers, Water
MIR
0.85 Max
NA
Fill Weight
11.25 ounces
NA
Weight
Per Gallon
NA
8.5 lbs.
Per Liter
NA
1.02 kg
Solids
By Weight
NA
27.4%
By Volume
NA
25.7%
Volatile Organic Compounds
NA
<250 g/l (2.08 lbs./gal.)
Wet Film to Achieve DFT
(unthinned material)
Varies depending on surface type
and porosity
Varies depending on surface type and
porosity
Practical Coverage at Recommended DFT
(assumes 15% material loss)
20-25 sq.ft./can
(1.8-2.3 m
2
/can)
400-500 sq.ft./gal.
(37.2-46.5 m
2
/gal.)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
30 minutes
30 minutes
Recoat
1 hour
2 hours
Light Use
24 hours
24 hours
Shelf Life
3 years
3 year
Flash Point
-42°F (-41°C)
167°F (75°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.