Specification

TECHNICAL DATA
VARATHANE
®
PREMIUM WOOD CONDITIONER
Rust-Oleum Corporation Form: GDH-364
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 050614
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
.PHYSICAL PROPERTIES .
PHY
PREMIUM WOOD CONDITIONER
Resin Type
Modified Alkyd
Pigment Type
None
Solvents
Mineral Spirits
Weight
Per Gallon
7.00 lbs.
Per Liter
0.83 kg
Solids
By Weight
37.4%
By Volume
32.4%
Volatile Organic Compounds
<550 g/l (4.5 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
0.5-1.0 mils
(12.5-25µ)
Wet Film to Achieve DFT
(unthinned material)
1.5-3.0 mils
(37.5-75µ)
Theoretical Coverage at
1 mil DFT (25µ)
520 sq.ft./gal.
(12.8 m
2
/l)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
440-880 sq.ft./gal. (10.8-21.6 m
2
/l)
110-220 sq.ft./quart (2.7-5.4 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1-2 hours
Handle
4-6 hours
Recoat
30 minutes
Shelf Life
3 years
Flash Point
105°F (41°C)
Safety Information
For additional information, see MSDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.