Specification

TECHNICAL DATA
VAR-18
VARATHANE
®
PREMIUM WOOD PUTTY
Form: GDH-649
Rev.: 011315
1
].DESCRIPTION AND USES .
Varathane
®
Premium Wood Putty is an easy to use, non-
hardening wood putty. It is ideal for filling nail holes and
minor defects after assembly and finishing.
.PRODUCTS .
SKU (3.75 ounce Jar) Description
223177 Natural
223178 Cherry
223179 Fruitwood
223250 Colonial Maple
223251 Dark Maple
223252 Red Mahogany
223253 Golden Oak
223254 Dark Walnut
.PRODUCT APPLICATION
SURFACE PREPARATION
Surface must be clean and dry. Apply stain, seal or
topcoat the surface before applying the putty. Allow any
previously applied oil or stain on wood surface to dry 72
hours before applying Wood Putty. If sanding the
surrounding area is needed, sand using 150-220 grit
sandpaper and remove all sanding dust with a vacuum or
a rag dampened with mineral spirits
PRODUCT APPLICATION (cont.) .
SURFACE PREPARATION (cont.)
WARNING! If you scrape, sand or remove old paint, you
may release lead dust. LEAD IS TOXIC. EXPOSURE TO
LEAD DUST CAN CAUSE SERIOUS ILLNESS SUCH AS
BRAIN DAMAGE, ESPECIALLY IN CHILDREN.
PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH-approved respirator to
control lead exposure. Clean up carefully with a HEPA
vacuum and a wet mop. Before you start, find out how to
protect yourself and your family by contacting the National
Lead Information Hotline at 1-800-424-LEAD or log on to
www.epa.gov/lead.
APPLICATION
Press putty into a nail hole or other imperfections. Wipe
excess putty from the surrounding area using a plastic
putty knife or a damp cloth. The putty will NOT harden to
a sandable surface. Colors can be blended for custom
matches.
Caution: May cause skin irritation. Wash with soap and
water to remove from skin.
CLEAN UP
Clean up with soap and water.