Specification
TECHNICAL DATA
VAR-15
VARATHANE
®
TOUCH UP MARKER
Form: RAC-23
Rev.: 012413
1
].DESCRIPTION AND USES .
Varathane
®
Premium Touch-Up Markers are a fast and
easy way to touch up minor scratches on stained wood.
Touch-Up Markers are ideal for minor scratches and
blemishes on furniture, cabinets, moldings, floors and
more. Use Varathane Premium Touch-Up Markers for
staining hard to reach areas or to provide color highlights
to arts and crafts.
.PRODUCTS .
SKU (1/3 fl. oz.) Description
215352 Color Group 1
215353 Color Group 2
215354 Color Group 3
215355 Color Group 4
215356 Color Group 5
215357 Color Group 6
215358 Color Group 7
215359 Color Group 8
215360 Color Group 9
215361 Color Group 10
.PRODUCT APPLICATION .
SURFACE PREPARATION
On previously finished wood surfaces, remove any
existing coatings using sandpaper or stripper. Prepare
bare wood for staining by sanding in the direction of the
grain. Begin with #120 grit sandpaper and progress
through #150, #180 and #220 grits. Remove all sanding
dust with a vacuum or clean rag dampened with mineral
spirits. Soft woods such as pine, fir and maple require a
wood conditioner. Use Varathane Premium Wood
Conditioner before staining.
WARNING! If you scrape, sand or remove old paint, you
may release lead dust. LEAD IS TOXIC. EXPOSURE TO
LEAD DUST CAN CAUSE SERIOUS ILLNESS SUCH AS
BRAIN DAMAGE, ESPECIALLY IN CHILDREN.
PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH-approved respirator to
control lead exposure. Clean up carefully with a HEPA
vacuum and a wet mop. Before you start, find out how to
protect yourself and your family by contacting the National
Lead Information Hotline at 1-800-424-LEAD or log on to
www.epa.gov/lead.
PRODUCT APPLICATION (cont.)
TESTING COLOR
Be sure to test your marker to verify the desired color. To
test, apply stain in an inconspicuous area. When testing
on soft woods, be sure to sand and condition the test area
first.
APPLICATION
Shake well before using. Remove cap and slowly depress
marker by pressing lightly on the tip. Press pen down and
apply the stain to the wood. Quickly wipe off excess using
a soft, lint-free cloth. Replace cap tightly after each use.
DRY TIME
Touch-Up Markers dry to the touch in 30 minutes and can
be handled in 1 hour. Dry times may be affected by
temperature, humidity and ventilation.