Manualshelf

Specification

ManualsBrandsVarathane ManualsPaint3.5 oz. Flat Color Group 6-Fill Stick (6-Pack)
12
TECHNICAL DATA
VAR-25
VARATHANE
®
PREMIUM FILL STICKS
Form: GDH-17
Rev.: 032113
1
].DESCRIPTION AND USES .
Varathane
®
Premium Fill Sticks are a quick and easy way
to repair scratches, nicks, dents or other minor
imperfections in any wood surface. Premium Fill Sticks are
suitable for touching up furniture, cabinets, trim, doors and
floors. Premium Fill Sticks can be used to complement
Varathane Premium Wood Stains or blend different Fill
sticks to create custom colors.
.PRODUCTS .
Fill Stick Description
215362 Color Group 1
215363 Color Group 2
215364 Color Group 3
215365 Color Group 4
215366 Color Group 5
215367 Color Group 6
215368 Color Group 7
215369 Color Group 8
215370 Color Group 9
215371 Color Group 10
.PRODUCT APPLICATION .
SURFACE PREPARATION
If the area around the nick or dent is rough, sand the area
smooth by sanding with #120 grit sandpaper in the
direction of the grain. Remove all sanding dust with a
vacuum or clean rag dampened with mineral spirits.
WARNING! If you scrape, sand or remove old paint, you
may release lead dust. LEAD IS TOXIC. EXPOSURE TO
LEAD DUST CAN CAUSE SERIOUS ILLNESS SUCH AS
BRAIN DAMAGE, ESPECIALLY IN CHILDREN.
PREGNANT WOMEN SHOULD ALSO AVOID
EXPOSURE. Wear a NIOSH-approved respirator to
control lead exposure. Clean up carefully with a HEPA
vacuum and a wet mop. Before you start, find out how to
protect yourself and your family by contacting the National
Lead Information Hotline at 1-800-424-LEAD or log on to
www.epa.gov/lead.
PRODUCT APPLICATION (cont.) .
APPLICATION
Prior to repairs, determine the Fill Stick color that best
matches the wood project. See the front panel of the
package for Fill Stick color identification. Test the Fill Stick
in an inconspicuous area to ensure the chosen color will
match the project. Work the Fill stick into the defect until
filled. Remove excess material using a plastic putty knife.
DRY TIME
Dry time of product depends on depth of scratch or repair.
Most repairs will dry within 5 minutes. If more than one
filling is required, allow sufficient dry time between fillings.
PROTECTING YOUR PROJECT
If desired, additional protection of the repaired area can be
achieved by applying a thin coat of Varathane Diamond
Polyurethane. Apply the polyurethane with an artist acrylic
paint brush and follow the manufacturer’s directions for dry
times.

Summary of content (2 pages)