Technical Specifications

TECHNICAL DATA
VARATHANE
®
PREMIUM FAST DRY WOOD STAIN
Rust-Oleum Corporation Form: GDH-315
11 Hawthorn Parkway Phone: [phone] Rev.: 052418
Vernon Hills, Illinois 60061 www.rustoleum.com
].PHYSICAL PROPERTIES PH
YSICAL t
PREMIUM FAST DRY WOOD STAIN
Resin Type
Urethane Modified Alkyd
Pigment Type
Inorganic
Solvents
Mineral Spirits
Weight
Per Gallon
7.0-8.9 lbs.
Per Liter
0.84-1.08 kg
Solids
By Weight
35.0-53.0%
By Volume
29.0-35.0%
Volatile Organic Compounds
500-550 g/l
(4.2-4.6 lbs./gal.)
Recommended Dry Film
Thickness (DFT) Per Coat
1.5-2.0 mils
(37.5-50µ)
Wet Film to Achieve DFT
(unthinned material)
5.0-6.5 mils
(125-162.5µ)
Practical Coverage at Recommended DFT
(assumes 15% material loss)
225-275 sq.ft./quart
70 sq.ft./half-pint
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Touch
1 hour
Recoat
1 hour
Full Cure
24 hours
Shelf Life
3 years
Flash Point
>100°F (38°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.