TDS

TECHNICAL DATA
VARATHANE ONE STEP STAIN & POLYURETHANE
.PHYSICAL PROPERTIES .
Rust-Oleum Corporation Form: GDH-756
11 Hawthorn Parkway Phone: 877•385•8155 Rev.: 030815
Vernon Hills, Illinois 60061 www.rustoleum.com
An RPM Company
ONE-STEP STAIN & POLYURETHANE
Resin Type
Oil Modified Urethane
Pigments
Micro Particle Organic Pigments
Solvents
Aromatic Petroleum Distillates
Weight
Per Gallon
8.52-8.55 lbs.
Per Liter
1.02-1.03 kg
Solids
By Weight
27.2%
By Volume
30.0%
Volatile Organic Compounds
<450 g/l (<3.76 lbs./gal.)
Recommended Dry Film Thickness
(DFT) per Coat
1.0 mils
(25µ)
Wet Film to Achieve DFT
(unthinned material)
2.5 mils
(62.5µ)
Practical Coverage at Recommended
DFT (assumes 15% material loss)
100 sq.ft./quart
(9.8 m
2
/l)
Dry Times at 70-80°F
(21-27°C) and 50%
Relative Humidity
Dust Free
1 hour
Through Dry
3 hours
Full Dry
4 hours
Shelf Life
5 years
Flash Point
106° F (41°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The statements of this literature
do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use of our materials are beyond our control, we can
guarantee these products only to conform to our standards of quality, and our liability, if any, will be limited to replacement of defective materials. All technical
information is subject to change without notice.