Use and Care Manual

TECHNICAL DATA
VAR-82
VARATHANE
®
CLASSIC
WOOD STAIN
Rust-Oleum Corporation
11 Hawthorn Parkway
Vernon Hills, Illinois 60061
Phone: 800∙901∙0411
www.rustoleum.com/varathane
Form: ARJ-1847
Rev.: 042219
PHYSICAL PROPERTIES
CLASSIC WOOD STAIN
Resin Type
Urethane Modified Alkyd
Pigment Type
Inorganic Pigments
Solvents
Mineral Spirits
Weight
Per Gallon
7.19-8.73 lbs.
Per Liter
0.86-1.04 kg
Solids
By Weight
29.0-34.0%
By Volume
42.0-42.1%
Volatile Organic Compounds
<550 g/l
Practical Coverage
(assumes 15% material loss)
125-150 sq.ft./qt.
500-600 sq.ft./gal.
Dry Times at 77°F
(25°C) and 50%
Relative Humidity
Touch
1-2 hours
Handle
2 hours
Recoat
2 hours
Shelf Life
3 years
Flash Point
105°F (41°C)
Safety Information
For additional information, see SDS
The technical data and suggestions for use contained herein are correct to the best of our knowledge, and offered in good faith. The
statements of this literature do not constitute a warranty, express, or implied, as to the performance of these products. As conditions and use
of our materials are beyond our control, we can guarantee these products only to conform to our standards of quality, and our liability, if any,
will be limited to replacement of defective materials. All technical information is subject to change without notice.