Specifications

44
Reference Manual
00809-0100-2460, Rev AA
Section 4: Configuration
November 2014
Configuration
4.3.2 Installation Procedure
To setup and configure a 2460 System Hub:
1. Ensure that a plan is available for all tanks and devices that specifies tag names, Modbus
communication addresses, number of temperature elements and other data that is
needed for a complete configuration.
2. Make sure that the 2460 System Hub is properly wired and up and running. Check that
the Power LED is on and the Status LED indicates normal operation (see Table 5-3 on
page 67).
3. Ensure that the TankMaster WinSetup program is up and running.
4. In WinSetup start the device installation wizard.
a. Click the right mouse button on the Devices folder.
b. Choose the Install new option.
5. Select device type:
a. Choose device type 2460 System Hub.
b. Specify a name for the System Hub in the 2460 System Hub Tag input field. This tag
will be used as an identifier of the Rosemount 2460 in various windows and dialogs. The
TankMaster program automatically suggests the first part of the name as specified in
the Tag Prefixes window (Service>Preferences).
c. Click the Next button to continue the installation procedure with communication
setup.