Specifications

46
Reference Manual
00809-0100-2460, Rev AA
Section 4: Configuration
November 2014
Configuration
How to Check Communication Channel and Port
To check which channels are enabled:
a. In the WinSetup workspace open the Protocols folder.
b. Expand the master protocol folder (typically the ModbusMaster).
c. Check that the desired channel is enabled. In the example above the Modbus Master
Channel 1 is enabled. Disabled channels do not appear in the protocol folder.
To check which communication port that is associated with a certain channel:
a. Right-click the desired protocol channel icon and choose Properties.
b. Open the Communication tab and check which communication port that is selected.
This example shows that port COM1 is used for Protocol Channel 1.
See the Rosemount Raptor System Configuration Manual (Document no. 300510) for more
information on how to configure communication protocols.
Modbus Master protocol folder
Modbus Master channel 1
Port