Specifications

66
Reference Manual
00809-0100-2460, Rev AA
Section 5: Operation
November 2014
Operation
Example
In case of a device error, the red LED will repeat a flash sequence that corresponds to the
particular type of error that ocurred. For example, in case of a RAM checksum error (code=4),
the LED will show a sequence of 4 flashes followed by a 750 millsecond pause. After the pause
the flashing starts over again in the same manner. This flash/pause sequence will be continously
repeated.
RAM checksum error (code 4) appears with the following Error LED (red) flash sequence as
illustrated in Figure 5-3:
Figure 5-3. Example of an error code flash sequence
Seconds