User Manual
Table Of Contents
- 4343W X-ray Detector
- Table of Contents
- List of Tables
- List of Figures
- 1.0 Scope
- 2.0 Contraindication
- 3.0 Intended Use
- 4.0 Audience
- 5.0 Abbreviations
- 6.0 Definition of Symbols
- 7.0 Standards and Regulations
- 8.0 Description of the 4343W
- 8.1 Shipment Contents
- 8.2 Optional Parts
- 8.3 X-ray Detector Surfaces and Features
- 8.4 X-ray Detector Dimensions
- 8.5 X-ray Detector Specifications
- 8.6 Environmental Considerations
- 8.7 X-ray Detector Battery
- 8.8 Optional Varex Provided Inductive Battery Charger
- 8.9 Designing a Custom Inductive Battery Charger
- 8.10 Using a Third-Party Inductive Battery Charger
- 8.11 Power-on and Power-off Sequence
- 8.12 Reboot Sequence
- 8.13 LED Status Indicator Behavior
- 8.14 Position Sensing
- 8.15 Detector Sharing
- 9.0 The Detector Configuration File
- 10.0 System Software
- 11.0 Maintenance
- 12.0 Troubleshooting
- 13.0 Disposing of the X-ray Detector and Battery
- 14.0 Safety - Electromagnetic Interference
- 15.0 Regulatory
- Index
www.vareximaging.com 19
4343W X-ray Detector
REFERENCE MANUAL
8.9 Designing a Custom Inductive Battery Charger
The OEM may design an Inductive Battery Charger following certain guidelines provided by
Varex Imaging. Please contact your appointed Varex representative for information and
requirements in designing a custom Inductive Battery Charger. See“Section 12.1, After-sales Ser-
vice for Varex Imaging Products” on page 56 for contact information.
WARNING
Custom Inductive Battery Chargers must be designed to conform to the
locations indicated for coil and IR sensor, as well as, the keep-out
requirement for active charger electronics to avoid interference with the
X-ray Detector operation.
WARNING
Custom Inductive Battery Chargers must have IR capability to disable
itself during imaging and calibration. Image artifacts or damage may
occur if inductive charging is not disabled during imaging or
calibration.
Caution
The custom Inductive Battery Charger may not fit all Bucky Trays.
System Integrator should qualify Bucky Tray before installing.