User Manual
Table Of Contents
- 4343W X-ray Detector
- Table of Contents
- List of Tables
- List of Figures
- 1.0 Scope
- 2.0 Contraindication
- 3.0 Intended Use
- 4.0 Audience
- 5.0 Abbreviations
- 6.0 Definition of Symbols
- 7.0 Standards and Regulations
- 8.0 Description of the 4343W
- 8.1 Shipment Contents
- 8.2 Optional Parts
- 8.3 X-ray Detector Surfaces and Features
- 8.4 X-ray Detector Dimensions
- 8.5 X-ray Detector Specifications
- 8.6 Environmental Considerations
- 8.7 X-ray Detector Battery
- 8.8 Optional Varex Provided Inductive Battery Charger
- 8.9 Designing a Custom Inductive Battery Charger
- 8.10 Using a Third-Party Inductive Battery Charger
- 8.11 Power-on and Power-off Sequence
- 8.12 Reboot Sequence
- 8.13 LED Status Indicator Behavior
- 8.14 Position Sensing
- 8.15 Detector Sharing
- 9.0 The Detector Configuration File
- 10.0 System Software
- 11.0 Maintenance
- 12.0 Troubleshooting
- 13.0 Disposing of the X-ray Detector and Battery
- 14.0 Safety - Electromagnetic Interference
- 15.0 Regulatory
- Index
REFERENCE MANUAL
vi www.vareximaging.com
Before You Begin 4343W X-ray Detector
Service Cable
WARNING
Disconnect the Service Cable by pulling on the connector and not the
cable itself. Ignoring this warning may cause substantial product
damage.
WARNING
Do not modify the Service Cable or subject the cable to external stress
or damage. Avoid placing anything heavy, including the X-ray
Detector, on the cable, stepping on the cable, pulling the cable, or
subjecting the cable to excessive bending or bundling. Ignoring this
warning may cause cable failure resulting in substantial product
damage.
WARNING
The Service cable is not verified for image acquisition. It should only
be used for the following:
•
to retrieve an orphaned image from the X-ray Detector, when a wireless
connection is not available
• for service