User Manual
Table Of Contents
- 4343W X-ray Detector
- Table of Contents
- List of Tables
- List of Figures
- 1.0 Scope
- 2.0 Contraindication
- 3.0 Intended Use
- 4.0 Audience
- 5.0 Abbreviations
- 6.0 Definition of Symbols
- 7.0 Standards and Regulations
- 8.0 Description of the 4343W
- 8.1 Shipment Contents
- 8.2 Optional Parts
- 8.3 X-ray Detector Surfaces and Features
- 8.4 X-ray Detector Dimensions
- 8.5 X-ray Detector Specifications
- 8.6 Environmental Considerations
- 8.7 X-ray Detector Battery
- 8.8 Optional Varex Provided Inductive Battery Charger
- 8.9 Designing a Custom Inductive Battery Charger
- 8.10 Using a Third-Party Inductive Battery Charger
- 8.11 Power-on and Power-off Sequence
- 8.12 Reboot Sequence
- 8.13 LED Status Indicator Behavior
- 8.14 Position Sensing
- 8.15 Detector Sharing
- 9.0 The Detector Configuration File
- 10.0 System Software
- 11.0 Maintenance
- 12.0 Troubleshooting
- 13.0 Disposing of the X-ray Detector and Battery
- 14.0 Safety - Electromagnetic Interference
- 15.0 Regulatory
- Index
www.vareximaging.com 43
4343W X-ray Detector
REFERENCE MANUAL
5 The Radiographic Acquisition Progress window will begin to show acquisition process with
a blue status bar. Once the image has appeared, another image may be taken or the window
may be closed by clicking Close.
Figure 43 Image Acquisition Progress
6
The acquired image can be saved in the desired file format by clicking File/Save As.
10.8.2 Radiographic Acquisition Settings
In the Radiographic Acquisition Progress window the type of acquisition may be changed.
1 Click the Acquisition Type Drop Down Menu to switch between Software or Hardware
Acquisition.
Figure 44 Acquisition Type Drop Down Menu