SPARE PART AND OPERATION MANUAL Form 109 (09/10) FOOD MIXER Model W150PL 1993 to Present
TABLE OF CONTENTS W150PL Installation Instructions.................................................................................................43 Operating Instructions...................................................................................................44 Cleaning-Maintenance..................................................................................................45 Belt Adjustments and Removal.....................................................................................
Read this page entirely BEFORE beginning installation. VARIMIXER INSTALLATION INSTRUCTIONS UNDER NO CIRCUMSTANCES ARE THE SPEED LEVER, BOWL LIFT LEVER, OR THE BOWL ARMS TO BE USED TO MOVE THE MIXER INTO PLACE. DAMAGE WILL RESULT TO THE UNIT. IT IS RECOMMENDED THAT THE TOP LID BE REMOVED BEFORE MOVING THE UNIT. The mixer must be mounted with the rubber feet, which neutralize both shaking and rusting. Spacers can be inserted under the mixer’s feet if the floor is uneven.
OPERATION OF THE MIXER: A) Open the bowl screen and place the bowl in the bowl arms. Note: The bowl arms must be in lowest position and the bowl must be pushed all the way into the bowl arms. (Fig.3). B) Place the mixing tool in the bayonet shaft. The pin on the tool must be turned into the bayonet hole (fig.2). C) The bowl is raised to working position by a clockwise turn of the button for bowl lift. Ensure that the bowl is placed correctly. Close the bowl screen.
Correct use of tools: Maintenance and Lubrication: Whips should never be struck against hard objects, this will decrease the life of the tool. Recommended applications for tools: Whip Cream Egg Whites Mayonnaise and the like. Beater Cakes Waffles Muffins and the like. Hook Pizza Bread Donut Doughs and the like. Cleaning: The variable speed pulleys must be lubricated regularly, i.e. a lubrication interval of approx. 60 hours of operation or once a week.
List of Errors Possible Solutions A rattling sound from the closed part of the mixer. Adjustment of special v-belt The mixer starts “striking” when kneading dough Adjustment of special v-belt which normally causes no problems. The mixer changes its speed by itself. Adjustment of special v-belt The minimum and the maximum speeds are changing. Adjustment of speed. The bowl is too tight or too loose. Adjustment of bowl fixing The tool hits the sides of the bowl. Adjustment of bowl centering .................
47
48
Machine Column W150PL Fig. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. W150PL Description Column Top Lid Rear Access Panel Threaded Bushing Top Lid Screw Top Lid Screw Rear Access Plate Indicator Arrow Plug Button (non bowl screen only) Knee Pad Intermediate Pad 3mm Intermediate Pad 6mm Foot Pad Bushings Bowl Arm Shaft Upper NSF Plate Lower NSF Plate Nut for NSF Plate Washer 140-22MO 150N-21 150N-22.7 STA 6580 STA 5017 STA 5080 15-245 STA 6519 80-212 80N-214.3 80N-214.
50
Fig. No. 1. 1A. 1B. 1C. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37.
52
Bowl Lift Microswitches W150PL Fig. No. Description 1. 2. 3. 4. 5.
54
Planetary Head W150PL Fig. No. 1. V-Belt (Must be changed as a set) 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 42A 43.
56
Transmission W150PL Fig. No. Description 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 14A. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 50A.
58
Speed Lever System W150PL Fig. No. 1. 2. 3. 4. 5. 6. W150PL Description 150N-47M 30N-47.10 30N-47.
60
Electrical Control Panel W150PL 1998-Present Fig. No. 1. 2. 3. 4. 5. 6. 7. 8. 10. 11. 12. 12A. 13. 14. 15. 16. 16A. 17. 18. 19. 20.
62
Electrical Power Supply W150PL 1998-Present Fig. No. Description W80-W100 1. 2. 3. 3A. 4. 5 5A. 6. 7. 8. 9. 10. Fuse Fuse Holder Contactor 220V Contactor 480V Auxiliary Switch Thermal Overload 11-16 Amps Thermal Overload 4-6.2 Amps Relay 24VDC IDEC RH1B-U Relay Socket LINAK Power Bowl Lift Control Transformer 220v/31v Rectifier 20E-418 20E-416 100-88.5 20-88.91 20-88.47 20-88.24 20-88.21 140E-420 140E-421 100N-86.01 60E-430.
64
Bowl Screen W150PL Fig. No. Description W150PL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
66
Accessories W150PL Fig. No. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 18. 19. W150PL Description S/S Bowl 150 Qt. S/S Bowl 80 Qt. Dough Hook 150 Qt. Dough Hook 80 Qt. Flat Beater 150 Qt. Flat Beater 80 Qt. S/S Flat Beater 150 Qt. Wire Whip 150 Qt. Reinforced Wire Whip 150 Qt. Wire Whip 80 Qt. S/S Wing Whip 150 Qt. Powder Mixing Tool 150 Qt. Bowl Scaper 150 Qt. Bowl Scraper 80 Qt . Bowl Truck f/80 Qt. Bowl Bowl Truck f/150 Qt.
Wiring Diagram 1993-2004 W150PL 68
This page intentionally left blank.
W150PL Wiring Diagram 2005- 70 W150PL
Wiring Diagram 2005- 71 W150PL
5489 Campus Drive Shreveport LA 71129 (800) 222-1138 (318) 635-3131 Fax www.varimixer.
