Technical data

17.12.2004 Rev. 2.0
Operation instructions
10
Lubrication of other movable parts:
The movable parts of the bowl arms, the shaft and the lifting rod must also be lubricated
with oil. Remove the rear covering and lubricate the marked points with an oil can (fig.5
point 2).
Grease types:
Grease for the pulley set shafts: Castrol LMX
On repair of the planetary head: Grease the toothed wheel and the toothed rim with Castrol
Molub Alloy 936SF Heavy or Castrol Grippa 355, the needle bearings in the planetary
head must not be lubricated with this type of grease. Do not use any other type of grease
than the one stated here.


ILJ