Manualshelf

Instruction manual

ManualsBrandsVaritronics ManualsCutterVariOuest Cutout Maker 1800
31323334353637383940
VariQuest™ Cutout Maker 1800 Maintenance 5-5
6. Carefully position the blade in the blade holder and insert it until only 1/4 inch of the blade protrudes
from the holder.
The cutter blade protrudes from
the blade holder slightly even
when retracted. Take care to
avoid contact with the blade.
Personal injury or equipment
damage may result if the blade is
touched.
7. Set the power switch to 1 (ON) to activate the electromagnet that draws the blade into its fully seated
position within the blade holder.
Position blade in blade holder
Power Switch
1 (ON)
0 (OFF)