Manual

VZ-FH100 100mm Video Fluid Head

User Manual

Thank you for your purchase of our professional 100mm ball-

leveling fluid head for cameras up to 22 lbs. We expect you to

have a great experience shooting with this product. However, to

ensure the best possible results, please review the manual for an

explanation of the FH100 and its features.

Design Features:

1 - Progressive counterbalance adjustment for heavier cameras

2 - Variable drag adjustment for pan

3 - Variable drag adjustment for tilt

4 - Locking levers for tilt and pan

5 - Button-activated backlight for leveling bubble

6 - Indexed quick-release plate with ¼”-20 and 3/8”-16 mounting

screws.

7 - Telescoping pan handle (2

accessory pan handle can be added

at extra cost)

Failure to Follow These Warnings Will Void Your Warranty:

-Only mount the FH100 to standard 100mm-bowl type tripods. Do not attempt to mount it to any

other type of tripod, or damage to the camera and head may result.

-Never disassemble any part of the FH100 or your warranty will become void.

-Do not add lubricants to the FH100 or attempt to service it – doing so will void your warranty.

-Store in room temperature conditions and never expose the FH100 to liquids. Do not expose

the FH100 to extreme heat (>110F) or severe cold (<25F) for extended periods.

Shown with optional 2

pan handle

PAGE 1
VZ-FH100 100mm Video Fluid Head User Manual Thank you for your purchase of our professional 100mm ballleveling fluid head for cameras up to 22 lbs. We expect you to have a great experience shooting with this product. However, to ensure the best possible results, please review the manual for an explanation of the FH100 and its features.
PAGE 2
-Always make sure the camera mounting screw is thoroughly tightened. -Do not pan the FH100 with the pan locking lever engaged and do not tilt the FH100 with the tilt locking lever engaged. -Damage caused by impact or misuse is not covered under warranty. First-Time Operating Notes Note that when you first unpack the FH100, the locking levers for pan and tilt may be locked. Unlock them prior to operating the head. Set up your 100mm-bowl tripod to the desired height and lock the legs.