Users Manual

11
Bluetooth mode boot
·Press FN+Insert for 3 seconds to switch on the keyboard (If F1,F2,F3,F4 flashing or F4 is always on,
then the keyboard has been turned on)
·The LED under F4 key is a 2.4G indicator. If a 2.4G adapter is plugged into the computer. Please
press Fn + F4 to enter the 2.4G mode after turning on the keyboard. The LED under F4 keys always
on under 2.4G mode. If the adapter is not plugged in the computer, the LED under F4 key flashes.
Device connection
·After switching on the keyboard, you need to search the keyboard on your PC. The keyboard shows
as“Varmilo VD-1”(Varmilo VD-2 for F2 Channel and Varmilo VD-3 for F3 Channel)
·The first time for the keyboard to pair with you device needs to enter a code. After you entered the
code, you can press the ‘Enter’ key to confirm the connection. If the keyboard connected
successfully with your device, the LED of F1 key will keep on and keyboard information is saved.
(F2 and F3 channel would be the same)