Users Manual

12
Power off
·Under Bluetooth mode and 2.4G mode, you can press FN+Insert for 3 seconds to turn off the keyboard.
·If the keyboard is turned off, you can still use it by plugging in the USB cable, it will work under Wired
mode.
Bluetooth / 2.4G mode to Wired mode
·Under Bluetooth mode and 2.4G mode, when you plugged in the USB cable, you can change it to Wired
mode by pressing FN+Delete, at the same time all the channel indicator LED will be off.
·After the 2.4G adapter plugged into the computer, press Fn + F4 to switch to the keyboard 2.4G mode.
If the keyboard is connected successfully, the LED under F4 key is always on.
·Memory function: If there is a connected device, it will connect with the last connected device directly
after the keyboard turned on.(Bluetooth transmission time is 3 minutes, if there is no device connected
within the time, the keyboard will automatically enter the sleep mode; if the computer end signal is not
detected under the 2.4G mode Then the F4 light flashes 10 times then goes to sleep).