Users Manual

Device Swapping

·Under wired mode, press Fn + Delete to connect to the last paired Bluetooth / 2.4G device. If the

device has not been connected to any devices, the indicator LED (F1, F2, F3 or F4) ﬂashes and the

keyboard will be in pairing mode.

·Under wired mode, press Fn + F1 ~ F4 to switch to the Bluetooth / 2.4G device of the corresponding

channel. If the corresponding channel has not been connected to Bluetooth / 2.4G device, the

indicator LED will ﬂash, and the corresponding key position pairing mode ( The same for

Bluetooth / 2.4G mode).

·Under wired mode, unplug the USB cable, the keyboard will switch to Bluetooth / 2.4G mode

automatically, and connect to the paired Bluetooth or 2.4G device. Under Bluetooth mode or

2.4G mode, plug in the USB cable and press Fn + Delete to switch the keyboard to wired mode.

At this time, the F1, F2, F3 key’s Bluetooth indicator LED or F4 key’s 2.4G indicator LED is oﬀ.