Technical data

ManualsBrandsVARO ManualsDomestic AppliancesPOWXG9025

POWXG9025 EN

1 APPLIANCE ..................................................................................... 3

2 DESCRIPTION (FIG. A) ................................................................... 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 4

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Working area ........................................................................................................... 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 4

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 ADDITIONAL SAFETY INSTRUCTIONS FOR HIGH-PRESSURE

CLEANERS ...................................................................................... 5

6.1 Mains power connection ........................................................................................ 6

6.2 Water connection .................................................................................................... 7

6.3 Safety devices ......................................................................................................... 7

7 ASSEMBLY ...................................................................................... 7

7.1 Mounting of foot and wheels (Fig. 1) ..................................................................... 7

7.2 Mounting of storage hook (Fig.2) ........................................................................... 7

7.3 Mounting of Patio Cleaner (Fig. 3) ......................................................................... 7

8 OPERATION ..................................................................................... 7

8.1 Connection of garden hose (Fig. 4) ....................................................................... 7

8.2 Mounting of high pressure hose (Fig. 5) ............................................................... 7

8.3 Mounting of lance and nozzle (Fig.6) ..................................................................... 8

8.4 Water connection .................................................................................................... 8

8.5 Start/stop of the machine ....................................................................................... 8

8.6 Multi nozzle (Fig. 7) ................................................................................................. 9

8.7 Foam Sprayer (Fig. 8) ............................................................................................. 9

8.8 Parking holder (Fig 9) ............................................................................................. 9

8.9 Patio Cleaner ........................................................................................................... 9

9 TECHNICAL DATA .......................................................................... 9

Summary of content (13 pages)

PAGE 1
POWXG9025 EN 1 APPLIANCE ..................................................................................... 3 2 DESCRIPTION (FIG. A) ................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 4 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Working area ......................
PAGE 2
10 POWXG9025 EN NOISE ............................................................................................... 9 11 MAINTENANCE AND CLEANING ................................................. 10 11.1 Cleaning of inlet filter ........................................................................................... 10 11.2 Cleaning of air vents ............................................................................................. 10 11.3 Greasing of couplings ..........................
PAGE 3
EN POWXG9025 HIGH PRESSURE WASHER 1900W POWXG9025 1 APPLIANCE Your high pressure cleaner has been designed for outdoors cleaning. Cleaning of: machines, vehicles, structures, tools, facades, terraces, gardening tools,… WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG. A) 1. 2. 3. 4. 5. 6. 7. 8. 9.
PAGE 4
EN POWXG9025 4 SYMBOLS The following symbols are used in this manual and/or on the machine: The jet must not be directed at persons, In accordance with essential pets, live electrical safety standards of applicable equipment or the European directives appliance itself. Class II - The machine is double insulated; Read manual before use Earthing wire is therefore not necessary. 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions.
PAGE 5
POWXG9025       EN Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury. Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely.
PAGE 6
POWXG9025  EN Check especially the insulation of the electric cable should be faultless and without any cracks. If the electric cable is damaged, an authorized local service centre should replace it. WARNING: High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment or the appliance itself. WARNING: Do not use the appliance within range of persons unless they wear protective clothing.
PAGE 7
EN POWXG9025 6.2 Water connection  Connection to the public mains according to regulations.  Inlet hose can be connected to the water mains with a max. inlet pressure of 10 bars. This high pressure washer is in Europe only allowed to be connected with the drinking water mains, when an appropriate mains backflow preventer has been installed, Type BA according to EN 1717.
PAGE 8
EN POWXG9025 8.3 Mounting of lance and nozzle (Fig.6) 1. Push the lance into the trigger gun 2. When inserted turn it. Caution: Make sure the lance is properly fixed to the gun 3. Attach the nozzles. Caution: When attaching the nozzle the button (A) on the nozzle should come out again. Check before activating the trigger that the nozzle is properly fixed. 8.4 Water connection An ordinary 1/2" garden hose of min. 10 m and max. 25 m will be suitable. IMPORTANT! Only use water without any impurities.
PAGE 9
EN POWXG9025 8.6 Multi nozzle (Fig. 7) The pressure can for the multi nozzle be adjusted by tuning it. WARNING: Do not do this under operation to avoid that the hand hits the jet. 8.7 Foam Sprayer (Fig. 8) 1. Unscrew the container (A) from the foam sprayer. 2. Add detergent to the container (A) and screw the container to the foam sprayer. 3. Adjust the amount of detergent with the button (B) 8.
PAGE 10
EN POWXG9025 11 MAINTENANCE AND CLEANING WARNING! Always disconnect the electrical plug from the socket prior to maintenance or cleaning. To ensure a long and problem free working life, please take the following advice:  Wash out water hose, high pressure hose, spray lance and accessories before mounting  Clean the connectors of dust and sand.  Rinse the detergent spraying attachment after use.  Clean the nozzles. Any repair should always be made in an authorized workshop with original spare parts 11.
PAGE 11
EN POWXG9025 13 TROUBLE SHOOTING SYMPTOM Machine refuses to start Fluctuating pressure Machine stops Machine pulsating Machine often starts and stops by itself Machine starts but no water comes out Copyright © 2014 VARO CAUSE Machine not plugged in Defective socket Defective extension cable Pump is sucking air Valves dirty, worn out or stuck Water supply not sufficient Pump seals worn Incorrect mains voltage Thermal sensor activated Nozzle partially blocked Amperage increase Air in inlet hose/pump In
PAGE 12
POWXG9025 EN 14 WARRANTY               This product is warranted as provided by law for a 36 months period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc.
PAGE 13
EN POWXG9025 16 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product : High Pressure Washer trade mark : POWERplus model : POWXG9025 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.