Instruction manual

V-AVM711D
20
Radio operations
Select radio mode
Open the “Source Menu” and select “Radio”.
Select band
Press BAND/SLOW PLAYBACK button on the RC, or touch repeatedly the BAND icon on the screen to select
bands in the following order: FM1 – FM2 – FM3 – AM1 – AM2.
Search for a station automatically
To search for a station along the increasing frequencies press RIGHT cursor button on the RC. To search for a
station along the decreasing frequencies press LEFT cursor button on the RC.
Notes: To stop searching, repeat the operation above or press other buttons having radio function. When a station is
received, searching stops and the station is played. If the unit receives a stereo broadcasting, the indicator light of
Stereo “ST” on the display will be lighted.
Search for a station manually
To search for a station manually, press repeatedly UP/DOWN cursor button on the RC, or touch the numeric
keypad icon and then touch the number buttons to input the radio station frequency numbers. During manually
searching, the frequency will be changed in steps.
Presetting stations automatically
Press ENTER cursor button on the RC, or press the AS button on the screen. Only stations with sufficient signal
strength will be detected and stored in the memory.
Notes: To stop automatic presetting, press buttons having radio functions. After automatic presetting, the previous
stations frequency will be overwritten. The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band
can store 6 stations; hence the unit can store 30 stations in all.