V-DV800BT CD/MP3 receiver with Bluetooth Instruction manual CD/MP3- c Bluetooth
V-DV800BT Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents...................................................................................................................................................................................................... 2 Important safeguards ...............
V-DV800BT Important safeguards Using the device at temperature below -10º may cause the breakage of the device. Before using please heat up the passenger compartment to the recommended temperature! Read carefully through this manual to familiarize yourself with this high-quality sound system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. When replacing the fuse, be sure to use one with an identical amperage rating.
V-DV800BT Accessories Receiver Remote control Steering remote control ISO connector Instruction manual Consumer information Warranty card 2 x Removal/Release keys 1 x 5 mm Nut 1 x Spring washer 1 x 12mm Screw 1 x Mounting/Support strap 1 x Plain washer USB extension cable 4
V-DV800BT Installation/connection Din front-mount (method 1) After inserting the holder into the dashboard, select the appropriate tab and bend them inwards to secure the holder in place. Insert fingers into the groove in the front of frame and remove it. Insert the levers supplied with the unit to the grooves at both sides. The unit can be installed or removed from the dashboard. 1. Dashboard 2. Spring washer 3. Screw (4 x 12 mm) 4. Screw 5. Strap 6.
V-DV800BT Din rear-mount (method 2) Installation using the screw holes at both sides of the unit. 1. Select a position where the screw holes of the main unit are fitted for aligned, and tighten the screws at 2 positions at each side. Use either truss screws (5 x 5 mm), depending on the shape of the screw holes in the bracket. 2. Screw. 3. Factory radio mounting bracket. 4. Dashboard or Console. 5. Hook (Remove this parts).
V-DV800BT Detach the unit Removing the panel 1. Turn the power off 2. Press the D.C.P. release button 3. Remove the D.C.P. Attaching the panel 1. Attach the panel at the right side first, with point B on the main unit touching point A on the D.C.P. (As shown on the diagram). 2. Then press the left side of D.C.P. onto the main unit until a “click” sound is heard. Note: DO NOT insert the D.C.P from the left side. Doing so may damage it. The D.C.P can easily be damaged by shocks.
V-DV800BT Electrical connections 8
V-DV800BT Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit. Cut the connector, connect the colored leads of the power cord to the car battery as shown in the color code table below for speaker and power cable connections.
V-DV800BT Panel controls Front panel 1. POWER/MUTE button 2. VOLUME knob/AUDIO/ENTER button 3. TA button 4. BAND/ERASE/CLEAR button 5. PAU/1 number button 6. STOP/2 number button 7. RPT/3 number button 8. RDM/4 number button 9. FOLDER UP/5 number button 10. FOLDER DOWN/6 number button 11. PREVIOUS button 12. NEXT button 13. PTY/X-BAS button 14. AF/SUB-W button 15. USB slot 16. EJECT button 17. MENU/DISP button 18. AS/PS/OSD button 19. DISC slot 20. AV in (AUX in) 21. OPEN button 22.
V-DV800BT Remote controller (RC) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26.
V-DV800BT 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40.
V-DV800BT Battery information of RC 1. Press the catch and at the same time pull out the battery tray. 2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the RC. Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short, disassemble or heat the battery or dispose it in a fire.
V-DV800BT Steering wheel remote control (SRC) Important safeguards Install this SRC as required by this manual. Failure to do so may cause an accident. Do not install this SRC near the doors where rainwater is likely to be spilled on the unit. Incursion of water into the SRC may cause smoke or fire. Do not install this SRC in such a place as may obstruct the drive’s view. Since interior layout differs depending on the type of vehicle, the ideal installation location for the SRC also differs.
V-DV800BT Operation buttons 1. MUTE button 2. BAND button 3. NEXT/PREVIOUS buttons 4. A (AUDIO) button 5. EJ (EJECT) button 6. DISP button 7. VOLUME+/VOLUME- buttons 8. PLAY/PAUSE button 9. MODE button Battery changing In order to ensure proper functioning of the steering wheel remote control, please make sure only use Lithium CR2025 Battery. If the receiver being controlled no longer responds to any key press even under favorable circumstances please replace the battery of the remote control.
V-DV800BT WARNING: Avoid installing this SRC in such a location where the operation of safety devices such as airbags is prevented by this SRC. Avoid installing this SRC in such a location where the operation of the steering wheel and the gearshift lever may be prevented. Otherwise, it may result a traffic accident. Fix this SRC securely to the steering wheel with the belt attached to the SRC. If this SRC is loose, it disturbs driving stability, which may result in a traffic accident.
V-DV800BT Basic operations Loading a CD Insert a CD into the disc slot, the CD will be automatically loaded and playback will begin. Ejecting a CD Press EJECT button to eject a CD. If the ejected CD is not being removed, after 10 seconds it will be reloaded automatically. Power ON/OFF Press POWER button or any other button on the front panel (except OPEN/EJECT) to turn the unit on. Press and hold POWER button to turn the unit off.
V-DV800BT iX-bass Press and hold PTY/X-BASS button to turn on the X-Bass function, and "ix-Bass ON" will appear on the display for 3 seconds. Press and hold X-Bass button again to turn this function off. Please refer to the related description in "Audio Menu of X-Bass" for details operation of X-Bass control. The X-Bass Boost Level control will only appear in the Audio Menu only if the X-Bass function is currently activated.
V-DV800BT Reset To Reset the Main Unit System After releasing the front panel, use a pencil or any non-metallic object to press and hold RESET button for 5 seconds to reset the main unit; the unit will return to the factory default settings. To Reset the DVD Setting Press SET UP button on the RC or press and hold AS/PS button to bring up the Setup Menu; select “Misc” then select “Use default settings”, the DVD Setting will resume to factory default value.
V-DV800BT System menu operation You can adjust the system setting in this unit by entering into the system menu, please read the below details operation for each system menu items: Access into System Menu Function List Press and hold DISP/MENU button for more than 3 seconds to enter the system menu items. Navigate through the menu items by repeatedly pressing DISP/MENU button to move to the next or previous option.
V-DV800BT during AF search or PI seek the regional code in the format PI code will be ignored. A regional station is possible to be received. Note: The Regional function On/Off Setting is valid only when the “AF” function is on. Program Volume (VOL PGM) This option allows the setting of the volume level of this unit automatically to be assumed when first turned on. Volume level “12” is the default setting.
V-DV800BT 1. LEVEL: select the Sub-woofer level from “0” to “12”. 2. LPF: adjust the Low pass filter (LPF) as Flat, 80Hz, 120Hz or 160Hz. Note: The SUBWOOFER control is only available for those units that are equipped with the optional sub-woofer line out, and only if connected to an optional sub-woofer speaker. The SUBWOOFER option will only appear in the audio menu if the SUBWOOFER feature is currently activated. Bass 1. LEVEL: adjust the bass level from -6 to +6. 2. C.
V-DV800BT Dual zone operation This unit is equipped with the advance feature “Dual Zone”. This function is useful if the user wants to select different modes of the audio output source for front and rear speakers. The details operation as follows: On/Off operation “Off” is the default setting. Press the 2-ZONE ON/OFF button on the RC or TA button on the panel to switch between Dual Zone On or Off. The “2-Zone” icon will appear on the display after Dual Zone is selected “on”.
V-DV800BT The default setting when Dual Zone is “ON” When Dual Zone is turned on, the audio output will be muted for about 1 second. The default source/mode for Front Zone is Tuner, and for Rear Zone is DVD. The default volume level is 12 for both Front & Rear Zone audio outputs (or the volume level set as VOL PGM level in the Menu). The display displays the Front Mode by default.
V-DV800BT Tuner operation Band selection Press BAND/CLEAR button on the unit or 0/BAND button on the RC to switch between FM bands and AM (MW) bands. Station search Manual tuning: press NEXT or PREVIOUS buttons on the panel for more than 3 seconds and press them repeatedly or FAST FORWARD/TUNE UP or FAST REWIND/TUNE DN button on the RC and press them repeatedly to move the radio frequency one step up or down.
V-DV800BT RDS operations Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. AF (Alternative Frequencies) function Press AF/SUB-W button to turn on or turn off the AF function. “AF ON” or “AF OFF” will be shown on the display. When AF is on, the RDS program will be automatically searched and received.
V-DV800BT You can store your favorite PTY into the preset memory M1 to M6. After selected a PTY item, press and hold any of the preset memory buttons to store the selected PTY. To recall the stored PTY item switch on PTY mode then press preset memory button, the unit will automatically search the stored PTY station in the preset memory.
V-DV800BT CD/MP3/WMA operation When a CD, USB or a memory card is inserted into the player, the following picture will appear on the monitor. CD Audio Disc MP3/WMA Music Files Track select Press PREVIOUS/NEXT buttons on the panel or FAST FORWARD/ FAST REWIND buttons on the RC to go to the next or previous track on the CD. The selected track number will appear on the display. Note: When the last track/file playback completed, the unit will automatically enter into stop mode.
V-DV800BT When a , USB or a memory card is inserted into the player, the first music file contained on the device will automatically start playback. Use the cursor UP button on the RC or FOLDER UP/5 number button on the unit to select a folder and press OK button, the folder is opened and the content will be displayed. Use cursor UP and DOWN buttons on the RC or FOLDER UP/5 and FOLDER DOWN/6 buttons on the unit to navigate between the file list and press OK button to confirm to play the selected file.
V-DV800BT Press PAU/1 button on the unit or PLAY/PAUSE button on the RC to resume normal playback. Note: The fast forward/backward speed may differ depending upon the disc. Random mode Press RDM/4 button during playback to play all tracks on a CD in a random order. Press the button again to resume normal playback. Repeat playback Press and hold less than 3 seconds REPEAT button on the RC or RPT/3 button on the unit to activate the repeat function. 1.
V-DV800BT Goto function 1. Under CD disc playback mode press GOTO button, then use number buttons to directly enter the desired track number for playback. 2. Under MP3/WMA playback mode, press GOTO button, then use number buttons to directly enter the desire playback time.
V-DV800BT Multi-format disc If a CD, USB or a memory card contain various categories of files, the Filter function can hide some files and not allow them for selection during the file/folder searching. The selection is done among the 3 categories: Audio, Photo and Video. Use RIGHT cursor button to go the “Filter” field; press OK button to open the selection box. Use UP/DOWN cursor buttons to navigate through the categories that need to be hidden; then press OK button to confirm.
V-DV800BT MPEG4 operations The unit supports playback of MPEG4 files, the details operation is exactly the same as CD/MP3/WMA operation. The following are special functions pertaining to the playback of MPEG4 file: External Subtitle External Subtitle setting is used for choosing the language domain (only for MPEG4). After selecting a language domain (alphabet), when playing an MPEG4 with external subtitle, the subtitle will be displayed using this language alphabet.
V-DV800BT USB operations Loading and ejecting USB drive Insert the USB drive into the corresponding slot with the help of a USB extension cable included. Never detach the front panel when a USB stick is plugged in the slot. Always remove USB stick before detaching the panel. USB Mode Selection In any other mode while inserting a USB stick into the slot, the unit will automatically switch from current mode to USB Host mode.
V-DV800BT SD/MMC operations Loading and ejecting SD/MMC Press EJECT button to slide down the panel. Insert the SD/MMC card with the label side up into the corresponding slot. Attach the front panel. To remove the memory card, detach the front panel, push the card till you hear a click sound, then pull out the card from the slot. Memory Card Mode selection After a SD or MMC card was inserted into the main unit card slot, press MODE button to select Memory Card mode.
V-DV800BT DVD operation Eject Press EJECT button to eject or load the disc. Once a DVD disc is inserted into the unit, the unit will automatically start the playback from the beginning of the disc, and then the DVD MENU or ROOT or TITLE in the DVD disc will appear on the TFT monitor and “ROOT” will be displayed on the TFT of the unit. Play/Pause Press PLAY/PAUSE button on the RC or PAU/1 button on the unit to pause playback. Press the buttons again to resume normal playback.
V-DV800BT Press NEXT or PREVIOUS buttons on the RC or on the unit to skip forward to the beginning of the next chapter or backward to the beginning of the previous chapter respectively. Repeat Press and hold REPEAT button on the RC or RPT/3 button on the unit less than 3 seconds to repeatedly play the current file. The repeat playback of the current file will continue until the repeat playback mode is disabled. To disable the mode, press and hold the buttons less than 3 seconds.
V-DV800BT 2. For VCD VCD2.0 Track 00:00:12 00:13:39 00:06:16 01:17:48 1/1 3. For MPEG4 MPEG4 3.11 Track Audio Subtitle 2/2 1/1 1/2 Mp3 2 cH Off 4. for JPEG JPEG Track 3/197 GOTO 1. Press GOTO button to pop up the search menu. The TFT will display the following: Search Track Time Disc Time -:-:-:-:- 2. Press UP/DOWN buttons on the RC to select the type of search: track search/track time search/disc time search.
V-DV800BT Search Track Time Disc Time -:2:22 -:-:- Select Disc Time to jump to a spot on the time of the whole disc and enter the time in units, minutes, and seconds: Search Track Time Disc Time -:-:-:12:35 Press OK button to playback the disc from the input content. But when the numeric input is out of content, pres OK to delete all input numbers. 3. Press GOTO button twice to cancel search menu. Zoom Press repeatedly ZOOM button during playback, scan or pause to increase the magnification level.
V-DV800BT Zooming does not work on subtitles or menu screens included on DVDs. Title Press TITLE button to bring up the Title Menu (DVD only, dependent on the type of disc if title option is available or not). Press cursor buttons to highlight selected Title Menu entry. Press OK or PLAY/PAUSE buttons to select the highlighted entry. Subtitle Press SUBTITLE button during playback to turn on/off subtitles and to change the subtitles (DVD only).
V-DV800BT The first press will show the current angle selected. Subsequent presses toggle to the next angle. The front panel will light its angle icon when angle changes are available. Some DVDs allow angle changes only via the disc menu. When the player is turned on or a disc is replaced, the player returns to the default angle.
V-DV800BT System setup menu Press the SETUP on the RC or press and hold AS/PS button on the front panel to enter the setup menu. Press it again to leave setup menu. Use UP/DOWN buttons to select the category. Press RIGHT button to enter submenu. Use UP/DOWN buttons to select the setting you need to change. Press OK button to confirm changes. Press LEFT button until you reach the main menu window. Language Choose OSD menu language and MPEG4 Subtitle language.
V-DV800BT If 16:9 is selected and a 4:3 TV is connected, 16:9 content will appear distorted during playback (objects look thin). TV system Auto: the TV system is auto switched according to the disc system. NTSC: this system is used in USA, Taiwan, Japan etc. PAL: this system is used in China, Europe, Hong Kong etc. Rating Parental Control Rating The Rating allows the user to have parental control feature of the player.
V-DV800BT Bluetooth Operation 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Before using Bluetooth, please make sure the mobile phone you use supports Bluetooth functions (Headset or Handsfree profiles or both). Before using Bluetooth, please make sure you completed pairing with your mobile phone first. Please refer to the user manual, section “PAIRING”. To ensure the best reception for pairing or reconnection, please make sure the phone battery is fully charged.
V-DV800BT 14. If the Bluetooth related operation is not performing normally, like cannot make pairing, cannot make an outgoing call, you can try to make a SOFT-RESET of the Bluetooth module by removing/detaching the panel from the main unit and waiting for about 1 min. Then reattach the panel to the unit and retry the Bluetooth operation again. Or you can RESET the whole unit by pressing RESET button behind the panel. By pressing RESET button all the stored memory will resume to factory default.
V-DV800BT Samsung (Redial last call), (In-Band Ring Tone): D508, D528. LG: KG320. Pairing Pairing The Bluetooth System Between User's Mobile Phone & The Unit Enter MENU - PAIRING mode to activate the operation of Pairing. To do that, press and hold MENU button. And press MENU button repeatedly until PARING:1 is found. appears on the display, press ENTER button on the unit or OK button on the RC to activate the Once PAIRING:1 Pairing mode.
V-DV800BT The unit can be re-connected by the following methods: Enter the MENU RE-CONN mode to activate the manual RE-Connection. To do that press and hold MENU button. And press MENU button repeatedly until RE-CONN:1 is found. Once the RE-CONN:1 is showed press the ENTER button on the panel or OK button on he RC to activate the manual Re-Connect mode. Note: The manual re-connect is only functional with the Mobile Phone that has already been paired with the unit before.
V-DV800BT Incoming call Answering an incoming call When there is an incoming call, the display will show the Phone Number. If the incoming call has no caller ID, the display will show “PHONE IN”. You can press ENTER button or “MODE” button to answer/accept the call. Note: The audio output of the present mode will be muted and the ringing tones will be heard, if an incoming call is not being answered. You can use the VOLUME knob or VOLUME +/- buttons to adjust the volume level.
V-DV800BT After the MODE/TRANSFER button is pressed, the mute of the present mode will be released at the same time. Depending on different type of Mobile Phone, the time needed for activating the CALL TRANSFER mode is different. Like Nokia Mobile Phone usually takes 3-5 seconds after pressing the MODE/TRANSFER button for audio transfer back. Incoming call ring volume Preset the ringing volume level for any incoming call. Enter the MENU - PHONE VOL mode to choose volume level of incoming call ring.
V-DV800BT Handling discs Dirty, scratched or warped discs may cause skip ping or noise. Handle the disc only by the edges. To keep clean do not touch its surface. Discs should be stored in their cases after use to avoid scratches. Do not expose discs to direct sunlight, high humidity, high temperature or dust. Prolonged exposure to extreme temperature can wrap the disc (such as leaving the discs in your car during summertime). Do not stick or write anything on either side of disc.
V-DV800BT Troubleshooting guide Symptom Cause Solution No power The car ignition is not on. Disc cannot be loaded. The fuse is blown. Presence of disc inside the player. If the power supply is properly connected to the car accessory switch the ignition key to “ACC”. Replace the fuse. Remove the disc in the player then put a new upward. Insert the compact disc with the label facing upward. Clean the disc or try to play a new one. Cool off until the ambient temperature returns to normal.
V-DV800BT Specification General Power supply Maximum power output Dimensions (W x H x D) FM Stereo Radio Frequency range Usable sensitivity Preset memory MW Section Frequency range Preset memory DVD Player Media types Supported formats Video system Aspect ratio Video output level Horizontal resolution Audio Specification Audio system Frequency Response S/N Ratio Line out 12 V DC 50 W x 4 channels 188 x 57 x 187 mm 87.5 - 108.
V-DV800BT Output: Bluetooth Bluetooth version Working distance Supported profiles 4 channel RCA line-out (3V) 1.2 Up to 3 m Headset/Handsfree/A2DP/AVRCP Specifications are subject to change without notice. Dimensions are approximate.
V-DV800BT ! . , . . ........................................................................................................................................................................................................... 54 .................................................................................................................................................................................... 55 ..................................................................................................
V-DV800BT -10º . ! , . . , , . , . . , , . , , . , . , , . , , , . . . , , . , , , , , . . . . .
V-DV800BT ISO 2x 1x5 1x 1 x 12 1x 1x USB 56
V-DV800BT / (1- ) . , , , . . , . 1. 2. 3. 4. 5. 6. (4 x 12 ) . . , , , , . , .
V-DV800BT (2- ) , . . 1. , . . (5 . 2. 3. 4. 5. . . . ( ). : , .
V-DV800BT RELEASE 1. 2. 3. 1. RELEASE . , B ( . A ). 2. . : . , RELEASE , . . , . , . . 5 RESET.
V-DV800BT 60
V-DV800BT ISO 1. ISO, , . 2. ISO , . , . .
V-DV800BT 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. USB 16. 17. 18. 19. 20. AV 21. 22.
V-DV800BT ( 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25.
V-DV800BT 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40.
V-DV800BT : 1. , 2. . CR 2025 3V . : , . ( ). . . 65 –6 .
V-DV800BT , . . , . . , . . , .
V-DV800BT 1. 2. 3. 4. 5. 6. 7. 8. 9. MUTE BAND NEXT/PREVIOUS A (AUDIO) EJ (EJECT) DISP VOLUME+/VOLUMEPLAY/PAUSE MODE , : Lithium CR2025. , . . 1. , ( 2).
V-DV800BT , ( ). , , . , , . , . . . .
V-DV800BT ; , EJECT, , , . . 10 . POWER . « ( OPEN/EJECT), . POWER, » POWER MUTE, , «Mute». . . (SUB-W) AF/SUB-W, «Subwoofer on». « SUB-W. : »; 3 « , X-bass 69 ». .
V-DV800BT PTY/X-BASS, «ix-Bass ON». X-Bass; 3 X- Bass. X-Bass , X-Bass « X-Bass MODE, /X-Bass». . , : TUNER, CD, AV-in 1, AV-in 2. . A/V (AUX) AV, MODE, , AV. AV MODE. : A/V 3.5 . , VOLUME , VOLUME+/VOLUME- . 0( 2> ) DISP/MENU, 3> . 46 ( ). : .
V-DV800BT 1 , RESET 2 , 3 ; . DVD SET UP ; AS/PS “ ” “ , ”, DVD .
V-DV800BT . DISP/MENU 3 , VOLUME . VOLUME+/VOLUME-. DISP/MENU OK . “CONTRAST 05”. 00 10. 1212- 24- . . 12, , . , VOLUME+ VOLUME. , «Distance» ( . VOLUME VOLUME ), . VOLUME , VOL+/VOL72 «Local» ( ).
V-DV800BT PI «OFF» ( PI , «Off», AF ). «On» ( AF . PI . ), , . : « F». , . 12. VOLUME +/ VOLUME - VOLUME . , . VOLUME +/ VOLUME -, (COLOR) . «Off» ( VOLUME .). . “COLOR 1” . AUDIO , “COLOR 2”. AUDIO. AUDIO. , ( 5 VOLUME+/VOLUME- ), VOLUME . : 10 . : VOLUME, , 73 00 ( ) 46 ( ).
V-DV800BT iX-Bass iX-BASS: Low ( ), MID ( 1. LEVEL: 2. LPF: ) 0 (LPF): Flat, 80 High ( 12. , 120 ). 160 . : , . , . 1. LEVEL: 2. C.FREQ: 3. BASS-Q: -6 +6. : 60 , 80 : 2N, 1N, 1W , 100 2W. 1. LEVEL: 2. C.FREQ: 3. MID-Q: -6 +6. : 500 , 1 : 2N, 1N, 1W , 1.5 2W. 1. LEVEL: 2. C.FREQ: Fader (Bal/Fad) 1. VOLUME ( 06 2. VOLUME -6 +6. : 10 , 12.5 200 2.5 , 15 VOL+/VOL-, ). ( VOL+/VOL-, ). 06 74 . 17.5 . .
V-DV800BT . . . TA 2-ZONE ON/OFF , . Zone” “2- . , ). “F-Zone” Tuner > DVD >AV-In “R-Zone” Tuner > DVD > AV-In AUDIO, F-Zone ( ) R-Zone ( , 10 , , VOLUME. , VOLUME. . , 10 , . , , “2-Zone” . MODE, , 10 , . . . . : , 1 75 .
V-DV800BT - , - DVD. ( - 12 , VOL PGM). . : Bass/Treble/Middle/ Balance/Fader/Sub-woofer/iX-bass. : , , : . , DVD DVD , 76 . .
V-DV800BT FM BAND/CLEAR AM (MW). 0/BAND : , REWIND/TUNE DN . NEXT PREVIOUS FAST FORWARD/TUNE UP : NEXT FAST REWIND/TUNE DN FORWARD/TUNE UP PREVIOUS 6 FAST . . AS/PS. : AF ( , ). . . : . , , . . AS/PS. ( 10 AS/PS FAST , . 77 .
V-DV800BT , , «ST». . 78 .
V-DV800BT RDS : RDS ( ) RDS . , , . AF ( ) AF/SUB-W, . «AF ON» RDS AF. AF «AF OFF». , RDS , RDS. : . TA ( ) TA, . «TA ON» , TA . , . «TRAFFIC INFO»; TA, . . TP , 60 TA «Lost TP, TA». , . PTY PTY knob/ENTER PTY(TA), VOLUME. NEXT PTY. 10 , PREVIOUS, 10 PTY 79 , .
V-DV800BT . "NO MATCH PTY", PTY (1-6) , , . M1 M6. PTY. (1-6), PTY, .
V-DV800BT CD/MP3/WMA CD , USB . CD MP3/WMA PREVIOUS/NEXT FAST FORWARD/FAST REWIND . . : . PLAY/PAUSE.
V-DV800BT CD , OK , USB . FOLDER UP/5 , ; . FOLDER UP/5 FOLDER DOWN/6 , OK. ID3 ID3 ( , , , . ( ( , .). ) ). PAU/1 PLAY/PAUSE STOP/2 . ( STOP . , . , DVD, VCD 1.1, VCD 2.0 STOP . CD). FAST FORWARD NEXT (2X, 4X, 8X 82 STOP/2 . 20 ).
V-DV800BT FAST BACKWARD PREVIOUS (2X, 4X, 8X PLAY/PAUSE . PAU/1 . : 20 ). . RDM/4 . , . 3 REPEAT RPT/3 . 1. « »; . 2. « »; . 3. « »; . 4. (« : 83 »). .
V-DV800BT CD/MP3/WMA , « . Goto ( 1. 2. ) CD GOTO, . MP3/WMA , GOTO, .
V-DV800BT (« CD .») , USB , , 3 . : .( ), « . . »; OK, . , ; OK « . ». 85 .
V-DV800BT MPEG4 MPEG4; CD/MP3/WMA , . MPEG4 : . MPEG4, . . : , , , : , : , . : , , , , , , , , . , , , . , , , , , , , , , , : , , , : ), , , ), ( ( , , , , , , , , MPEG4 , , , . , , , > MPEG4.
V-DV800BT USB USB USB USB . , USB , USB . . USB USB USB, «USB Host», . , USB . . USB MODE. : USB . USB ; . , USB , USB USB. , , . . 20-30 . USB 2 , CD/MP3/WMA . USB . 87 , .
V-DV800BT SD/MMC SD/MMC EJECT, . , . SD/MMC . , , . Memory Card SD MMC , MODE, Memory Card. . . Memory Card : MODE. , . SD/MMC , CD/MP3/WMA MODE/TRANSFER 2 SD/MMC . 88 , Memory Card .
V-DV800BT DVD EJECT . DVD , , «ROOT». PLAY/PAUSE PAU/1 , . . STOP/2 . ( STOP , DVD, VCD 1.1, VCD 2.0 STOP . FAST FORWARD . PLAY/PAUSE FAST BACKWARD . PLAY/PAUSE . 20X). CD). STOP/2 NEXT (2X, 4X, 8X PAU/1 20X). . PREVIOUS (2X, 4X, 8X PAU/1 : .
V-DV800BT NEXT PREVIOUS . 3 REPEAT RPT/3 . , 3 . DVD DVD MENU DVD PLAY . PBC ( 3 . )( VCD ) PBC ( PBC VCD 2.0 . . OK DVD OSD . DVD DVD Video . . . AS/PS/OSD : : 00:00:07 1/1 1/4 OK , DVD MENU, 1. 4/RDM . . 01:03:48 -/- 2 Ch 90 ).
V-DV800BT . . 1/1 2. Bitrate 0.000 Mbps 00:00:12 00:13:39 00:06:16 01:17:48 VCD VCD2.0 . 3. 1/1 MPEG4 MPEG4 3.11 . . . 4. 2/2 1/1 1/2 Mp3 2 cH . JPEG JPEG . 3/197 GOTO ( 1. ) GOTO . .
V-DV800BT 2. , : . « » ( ), : . -:2:22 -:-:« » ( ), : . -:-:-:12:35 OK . OK 3. . GOTO . ZOOM , 3 . : 92 .
V-DV800BT Q1 Q2 Q3 . . : . . TITLE ( DVD, ). PLAY/PAUSE. OK . SUBTITLE ( DVD ). . ; SUBTITLE. DVD , . DVD . . .
V-DV800BT DOWN/6 DVD AUDIO ( , ( , , FOLDER DVD/MPEG4 ). ; ). SUBTITLE. DVD . . ANGLE , ( DVD , ). . . . , . DVD . . DVD , AS/PS/OSD : AS/PS/OSD . : AS/PS/OSD : VOLUME AUDIO « ». «Set Up». . .
V-DV800BT SETUP . AS/PS , . . , . , OK . . . MPEG4. : DVD . , . ( : 4:3 = 16:9 = DVD VCD ). 4:3. 16:9.
V-DV800BT DVD . 4:3PS . 4:3 16:9, . Auto: NTSC: PAL: , , , . , . . , OK , – 8888). ( . « OK, », OK . « OK », . . 96 .
V-DV800BT Bluetooth 1. 2. Bluetooth, Bluetooth , . , ( “ ). 3. 4. , . “BT60” – ” , , . , 3 . 5. , , . 6. 7. , “Power Saving Mode” ( . , . 8. , Bluetooth . Bluetooth , , 1 . 9. Bluetooth 10. Sony Ericsson ), “Power Saving Mode” Bluetooth “ Bluetooth”). ( , ”( Bluetooth Nokia) “In band ring tone”, , Sony Ericsson . . .
V-DV800BT 11. 30. , . Bluetooth, SOFT-RESET ( 12. , 1 Bluetooth. , : , ) Bluetooth, . , . RESET . , , Bluetooth 1.2 Bluetooth . . . , , , . Bluetooth: ), Pairing cancel ( ), In-Band Ring Tone ( ), Talk ( ), ), AudioTransfer ( ), Volume up/down ( ), Hang up ( ), Redial last call ( ). . , ( ) . , , .
V-DV800BT Siemens & BenQ: S55, S88. Dopod (In-Band Ring Tone): 818, 565. MIO (In-Band Ring Tone): A700. Blackberry: 8700. Samsung (Redial last call), (In-Band Ring Tone): D508, D528. LG: KG320. Bluetooth , ”. “PARING:1 “PAIRING:1 ” OK , MENU. MENU, , ENTER . : BAND/CLEAR. . Bluetooth : , . “Bt60” . “BT60” “1234”. , “PAIRING:1 ” . , “PAIRING:1 X” . : 5 . POWER, BAND/CLEAR ,VOLUME +/- & MUTE. , Bluetooth .
V-DV800BT ( , 2 ) ( ), . . Bluetooth “ RE-CONN . ”, . MENU. MENU, “ RE-CONN:1 ”. “ OK RE-CONN:1 , ENTER . : , RE-CONN “ , . “ ” RE-CONN:1 . ” . . “ , RE-CONN:1 X”. . Bluetooth Bluetooth. RE-CONN MENU . MENU. RE-CONN:1 . RE-CONN:1 VOLUME+/VOLUMEOK , VOLUME DIS-CONN:1 .
V-DV800BT DIS-CONN:1 . , DIS-CONN:1 . . , “PHONE IN”. ( : . MP3, DVD, . MODE, ENTER ) , . . , VOLUME VOLUME +/-. BAND/CLEAR. . ( ) , . Note: , EJECT BAND/CLEAR . . , . “PHONE 00:00( VOLUME .
V-DV800BT BAND/CLEAR. . . , , , . BAND/CLEAR . , MODE/TRANSFER, . MODE/TRANSFER, “TRANSFER . , . MODE/TRANSFER PHONE VOL MENU. VOLUME ”. , , , 3-5 Nokia . MENU, VOLUME+/VOLUME-, . 102 .
V-DV800BT , ( ). , . , . , , . ( , ). . , , . . , , . . ( ), , , . . , , , . . , , . .
V-DV800BT . , « ». . . CD . , . . . . . , . . . . . . RESET. . . . 30 . , 30 . . . . . . . .
V-DV800BT 12 50 ( x FM x ) (DC) x4 188 x 57 x 187 87.5 - 108.0 25 /1 18 MW 522 6 – 1620 DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW/USB/SD/MMC DVD/VCD/MPEG4/CDDA/MP3/WMA/HDCD/DVDAudio/SuperAudio CD/ Picture-CD/Picture CD/Photo CD/JPEG playback PAL/SECAM/Auto 16:9 4:3 1.
V-DV800BT 50 RCABluetooth Bluetooth (3 ) 1.2 3 Headset/Handsfree/A2DP/AVRCP . .
