User`s guide

3.2
Adjustment Procedure
Feature Adjustment Instructions
Automatic
Adjustment
Press Menu and the automatic adjustment will be the first item to appear on the
OSD.
Hit Select and then press the Up/Down button to navigate to Geometry.
Press Select again and the display will automatically adjust the geometry.
Press the Up/Down button to Color Balance.
Hit Select again and the display will automatically preset the color balance to a
factory preset value.
Horizontal
Position
Press Menu. Press the Up button to the second icon which is Horz. Pos
Hit Select and then press the Up/Down button to achieve the desired position.
The desired value will be graphically illustrated along with a digital value.
When complete press Select and you are ready to move to the next adjustment.
Vertical
Position
Press Menu. Press the Up button to the third icon which is Vertical Position.
Hit Select and then press the Up/Down button to achieve the desired position.
The desired value will be graphically illustrated along with a digital value.
When complete press Select and you are ready to move to the next adjustment.
Horizontal
Size
Press Menu. Press the Up button to the fourth icon which is Horizontal Size.
Hit Select and then press the Up/Down button to achieve the desired size.
The desired value will be graphically illustrated along with a digital value.
When complete press Select and you are ready to move to the next adjustment.
Phase
Press Menu. Press the Up button to the fifth icon which is Phase.
Hit Select and then press the Up/Down button to achieve the desired phase.
The phase should be adjusted until the screen image is sharp and there is no
When complete press Select and you are ready to move to the next adjustment.
Brightness
Press Menu. Press the Up button to the sixth icon which is Brightness.
Hit Select and then press the Up/Down button to achieve the desired brightness
level.
The desired value will be graphically illustrated along with a digital value.
When complete press Select and you are ready to move to the next adjustment.
Contrast
Press Menu. Press the Up button to the seventh icon which is Contrast.
Hit Select and then press the Up/Down button to achieve the desired contrast level.
The desired value will be graphically illustrated along with a digital value.
When complete press Select and you are ready to move to the next adjustment.
Adjustment Procedure
8