User`s guide

VT104 DiamondVue User Guide 150-023
2.5
Signal Connections Cont.
5
Standard Resolution Supported
⇒ 640 x 480 (VGA)
Pin assignments for the HD15
video connector.
Pin
1 Red Video
2 Green Video
3 Blue Video
4 Not Used
5 Return
6 Red Video Ground
7 Green Video Ground
8 Blue Video Ground
9 No Connection
10 Sync Ground
11 Not Used
12 Bi-Directional Data
13 Horizontal Sync
14 Vertical Sync
15 Data Clock (SCL)
Composite Video Input Connector: CVBS 1.0V p-p
S-Video: S-VHS
LUMA Signal Input 0.7V p-p
CHROMA Signal Input 0.7V p-p
You can use an HD-15 connector cable or a BNC adapter cable to connect the flat panel
monitor to the host computer. The HD-15 video cable (supplied in the kit) you use with this
monitor is equipped with a conventional HD-15 connector at each end.
Note:
The following figure is the view looking into the pin end of the male connector or solder term
end of the female connector.