Safety data sheet

Pipe Thread Sealant medium strength with potable-water approval
Safety Data Sheet
Product code: 15-77
Print date: 13.05.2015 Page 3 of 5
ITW LLC & Co. KG
according to Regulation (EC) No 1907/2006
Does not contain substances above concentration limits fixing an occupational exposure limit.
Additional advice on limit values
8.2. Exposure controls
Change contaminated clothing. Wash hands before breaks and after work. When using do not eat or
drink. No special precautionary measures are necessary.
Protective and hygiene measures
Tightly sealed safety glasses.
Eye/face protection
DIN EN 374 Tested protective gloves are to be worn: Butyl rubber. For special purposes, it is
recommended to check the resistance to chemicals of the protective gloves mentioned above together
with the supplier of these gloves.
Hand protection
No special precautionary measures are necessary.
Respiratory protection
yellow
liquid
Physical state:
Colour:
9.1. Information on basic physical and chemical properties
SECTION 9: Physical and chemical properties
odourless
Odour:
Test method
Changes in the physical state
not determined
Melting point:
not determined
Initial boiling point and boiling range:
> 100 °CFlash point:
not explosive.
Explosive properties
Density (at 25 °C): 1,05 g/cm³
Water solubility:
Immiscible
Viscosity / dynamic:
(at 25 °C)
18000-30000 mPa·s
SECTION 10: Stability and reactivity
10.1. Reactivity
No data available
10.2. Chemical stability
Product is stable in the test system throughout the duration of the test.
10.3. Possibility of hazardous reactions
No data available
No data available
10.4. Conditions to avoid
Revision No: 1,06 Revision date: 12.05.2015 GB - EN