User Manual BAT.
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 27.05.
Table of Contents Table of Contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of Contents 7.5 7.6 7.7 7.8 4 BAT.PAR 3 RGBW LED Spotlight Functions in 1-channel DMX mode........................................................................................... Functions in 4-channel DMX mode........................................................................................... Functions in 6-channel DMX mode........................................................................................... Functions in 7-channel DMX mode...........................................
BAT.
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. 8 BAT.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – suspended load. Warning – danger zone. 10 BAT.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present.
Safety instructions WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. WARNING! Incorrect handling of lithium batteries can result in injury In the event of a short circuit, overheating or mechanical damage, lithium batteries can cause severe injuries. Follow the advice on the correct handling of lithium batteries in the present section. NOTICE! Risk of fire Do not block areas of ventilation.
Safety instructions NOTICE! Power supply Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire.
Safety instructions NOTICE! Possible damage to lithium-ion batteries through incorrect storage By deep discharge, lithium-ion batteries can be permanently damaged or lose some of their capacity. Before long breaks, charge the batteries to around 50 % of their capacity and then switch off the device. Store the device at room temperature or cooler in an envi‐ ronment as dry as possible. If the batteries are stored for a longer period, recharge them to 50 % every three months.
Features 3 Features Special features of the device: n LED layout: three RGBW LEDs (red, green, blue, white, each 8 W) n Stand-alone, master-slave or DMX mode operation n Control via DMX (four different modes), via buttons and display on the device and sup‐ plied IR remote control (item no. 405611) n Stand-alone operation with static colours n Sound control n Battery or mains powered n Power adapter and infrared remote control included n Suitable for use in clubs, bars, theatres, exhibitions, etc.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand. 18 BAT.
Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings provided on the twopiece bracket for attaching.
Installation Please note that this device must not be connected to a dimmer. 20 BAT.
Installation Inserting batteries into the remote Push the lock of the battery holder towards the centre of the housing and pull out the battery holder like a drawer. Insert the batteries. Check for correct polarity as shown on the back of the remote control. Slide the battery holder back into the remote until it clicks into place. When shipping, the batteries are already installed in the remote and protected against dis‐ charge by a transparent plastic film. Remove the plastic film before initial use.
Installation NOTICE! Risk of fire due to incorrect polarity Incorrectly inserted batteries may destroy the device or the batteries. Ensure that proper polarity is observed when inserting batteries. 4.1 Dealing with lithium batteries WARNING! Incorrect handling of lithium batteries can result in injury In the event of a short circuit, overheating or mechanical damage, lithium bat‐ teries can cause severe injuries. Follow the advice on the correct handling of lithium batteries in the present sec‐ tion.
Installation Store lithium batteries away from heat sources (e.g. radiators or sunlight). Lithium batteries are hermetically sealed. Never attempt to open a lithium battery. If the battery housing is damaged small amounts of the electrolyte may leak out. If this should happen, seal the lithium battery in airtight packaging and wipe up the traces of electrolyte using absorbent paper towels. You must wear protective rubber gloves when doing so.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. 24 BAT.
Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W). BAT.
Connections and controls 6 Connections and controls ö # MENU UP DOWN ENTER 20 40 60 80 120 BATTERY INDICATOR $ POWER % & 26 BAT.
Connections and controls 1 Display and function buttons. [MENU] Activates the main menu and toggles between menu items. Closes an opened submenu. [UP], [DOWN] Toggles between the menu items of a menu level, increases or decreases the displayed value by one. [ENTER] Selects an option of the respective operating mode, confirms the set value. 2 Locking screw for the bracket. 3 Bracket for floor placement or hanging 4 [POWER] Connection socket for the 15 V power supply unit 5 Rechargeable battery compartment.
Connections and controls 7 [BATTERY INDICATOR] Remaining battery capacity display. When all the LEDs are on, the battery is fully charged. If only the red LED is on, the unit must be connected to the mains again to charge as soon as possible. 8 [DMX IN] DMX input 9 [DMX OUT] DMX output 28 BAT.
Connections and controls Infrared remote control (item no. 405611) Since the universal remote control can be used for several device types, some buttons may not be assigned and therefore have no function. # ö % & ( $ DMX SLAVE AUTO 1 AUTO 2 SPEED SOUND 1 SOUND 2 UP 0 STROBE DOWN 1 2 3 4 5 W 6 7 8 9 R G B ' ) * BAT.
Connections and controls 1 Turns the device on and off. 2 [DMX] Switches between DMX and stand-alone mode. 3 [SLAVE] Switches between master and slave mode. 4 [AUTO 1], [AUTO 2] Activates automatic mode 1 or 2 [SPEED] Activates the setting mode for the programme speed. Adjust the speed using [UP] and [DOWN]. 5 [SOUND 1], [SOUND 2] Activates sound-control mode 1 or 2. Adjust the mode using [UP] and [DOWN]. 6 [UP] Switches between programmes. Increases the set value. 30 BAT.
Connections and controls [DOWN] Switches between programmes. Decreases the set value. 7 [STROBE] Activates the Strobe effect. 8 [0 … 9] Numeric buttons for direct value input. 9 Buttons for colour selection Use n [W] for white light, n [R], [G], or [B] for primary colours red, green and blue. BAT.
Operating 7 Operating 7.1 Starting the device Turn on the power using the main switch. The display shows the current operation mode. 7.2 Operating on the unit Wait about 15 seconds until the display turns dark after confirming the last change of the set‐ tings. Then the settings are saved. DMX address Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Addr’ . Confirm with [ENTER]. Now you can set the number of the first DMX channel to be used by the device (DMX address).
Operating Sound control Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Soun’ . Confirm with [ENTER]. Use [UP] and [DOWN] to select the desired mode ‘Sou1’ or ‘Sou2’ . Confirm with [ENTER]. Now you can adjust the sensitivity of the built-in microphone for sound control. Use [Up] and [Down] to select a value between 0 (low sensitivity) and 9 (high sensitivity), display shows ‘Se0’ … ‘Se9’ . Dimmer settings Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Stat’ .
Operating Use [UP] and [DOWN] to select the desired mode ‘Aut1’ , ‘Aut2’ or ‘Aut3’ . Confirm with [ENTER]. Now you can adjust the progress speed of the programme between ‘SP 1’ and ‘SP 9’ . Device info Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Info’ . Confirm with [ENTER]. The display shows the version number of the currently installed software. Use [UP] and [DOWN] to select the option ‘tenP’ . Confirm with [ENTER]. The display shows the current device temperature.
Operating n n n n ‘1Ch’ ‘4Ch’ ‘6Ch’ ‘7Ch’ (one channel) (four channels) (six channels) (seven channels) Confirm the selection with [ENTER]. BAT.
Operating 7.3 IR remote control Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘reno’ . Confirm with [ENTER]. Use [UP] and [DOWN] to select the option ‘on’ to operate the unit via the IR remote control. Confirm with [ENTER]. 36 BAT.
Operating 7.4 Menu overview SoUn Addr A001 Stat CoLo SoU1 r000 SoU2 G000 CoL1 rEno Info AUto SLAv AUt1 tenP on AUt2 uer off Chnd SLA 1ch 4ch CoL51 A512 6ch b000 Se0 U000 7ch SP 1 SP00 Se9 SP 9 BAT.
Operating 7.5 Functions in 1-channel DMX mode Channel Value Function 1 0…255 Selecting colour macros 1 … 51 7.6 Functions in 4-channel DMX mode Channel Value Function 1 0…255 Intensity red (0 % to 100 %) 2 0…255 Intensity green (0 % to 100 %) 3 0…255 Intensity blue (0 % to 100 %) 4 0…255 Intensity white (0 % to 100 %) 38 BAT.
Operating 7.7 Functions in 6-channel DMX mode Channel Value Function 1 0…255 Master dimmer (0 % to 100 %) 2 0…255 Intensity red (0 % to 100 %) 3 0…255 Intensity green (0 % to 100 %) 4 0…255 Intensity blue (0 % to 100 %) 5 0…255 Intensity white (0 % to 100 %) 6 0…255 Stroboscope effect (0 % to 100 %) BAT.
Operating 7.8 Functions in 7-channel DMX mode Channel Value Function 1 0…255 Master dimmer (0 % to 100 %) 2 0…255 Intensity red (0 % to 100 %) 3 0…255 Intensity green (0 % to 100 %) 4 0…255 Intensity blue (0 % to 100 %) 5 0…255 Intensity white (0 % to 100 %) 6 0…15 No function 16…31 Programme 1 32…47 Programme 2 48…63 Programme 3 64…79 Programme 4 80…95 Programme 5 40 BAT.
Operating Channel 7 Value Function 96…111 Programme 6 112…127 Programme 7 128…143 Programme 8 144…159 Programme 9 160…175 Programme 10 176…191 Programme 11 192…207 Programme 12 208…223 Programme 13 224…239 Sound mode 1 240…255 Sound mode 2 0…255 Stroboscope effect (0 % to 100 %), if channel 6 = 0 BAT.
Operating Channel Value Function Programme speed, if channel 6 = 16…223 Microphone sensitivity, if channel 6 = 224…255 42 BAT.
Technical specifications 8 Technical specifications 250 mm 254 mm 134 mm Light source 3 × RGBW, each 8 W Optical properties Beam angle Control DMX, infrared remote control, buttons and display on the device Number of DMX channels 1, 4, 6 or 7 Input connections Power supply Connection socket for the 15 V power adapter DMX control XLR chassis plug, 3-pin Output connections DMX control XLR chassis socket, 3-pin Power consumption 24 W Power supply Battery 25 ° Battery type Replaceabl
Technical specifications Capacity 1500 mAh Operating time 4 h (Auto mode) Power adapter, 100 - 240 V 44 BAT.PAR 3 RGBW LED Spotlight 50/60 Hz Operating voltage 15 V Battery remote control 2 × button cell AG10, 1.5 V Degree of protection IP20 Mounting options hanging, standing, tripod-mounted Dimensions (W × H × D) 250 mm × 254 mm × 130 mm Weight 1.9 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20 %…80 % (non-condensing) min.
Technical specifications Further information Construction Flat Par LED type x-in-1 Base housing yes Fanless No Remote control included wireless DMX No Housing colour Black BAT.
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed. Please take our tips, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into a socket, the result of an incorrect connection may be a destroyed DMX controller, a short circuit or ‘just’ a not working light show! DMX connections 46 BAT.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: BAT.
Troubleshooting Symptom Remedy Device not working, no light Check the mains connection and the main fuse. Not responding to DMX controller 1. Check the DMX connectors and cables to see if they are properly linked. 2. Check the address settings and the DMX polarity. 3. Try using another DMX controller. 4. Check whether the DMX cables run near or parallel to high-voltage cables that may cause damage or interfer‐ ence to the DMX interface circuit.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Protecting the environment Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. BAT.
Notes 52 BAT.
Notes BAT.
Notes 54 BAT.
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
