User manual

Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Soun’ . Conrm with [ENTER].

Use [UP] and [DOWN] to select the desired mode ‘Sou1’ or ‘Sou2’ . Conrm with [ENTER].

Now you can adjust the sensitivity of the built-in microphone for sound control. Use [Up] and

[Down] to select a value between 0 (low sensitivity) and 9 (high sensitivity), display shows

‘Se0’ … ‘Se9’ .

Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Stat’ . Conrm with [ENTER].

Use [UP] and [DOWN] to select the xed colour for which the dimmer setting should be

adjusted:

n BAT.PAR 6 RGBWA (item no. 385435): Red, green, blue, white, amber

n BAT.PAR 6 RGBUV (item no. 385457): Red, green, blue, UV, speed strobe eect

Adjust the setting as desired in a range from 0 … 255 (0 % to 100 %) and conrm with [ENTER]

to switch to the next colour in the menu.

Press [MENU], [UP] or [DOWN] repeatedly until the display shows ‘Colo’ . Conrm with [ENTER].

Use [UP] and [DOWN] to select a constant colour in a range from ‘Col1’ … ‘Col51’ . Conrm

with [ENTER].

Sound control

Dimmer settings

Constant colour

Operating

BAT.PAR 6 RGBWA BAT.PAR 6 RGBUV

LED spotlight