User manual Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB LED bar
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 24.03.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of contents 7.6 Functions in 5-channel DMX mode........................................................................................... 46 7.7 Functions in 24-channel DMX mode........................................................................................ 47 4 8 Technical specifications....................................................................................................................... 50 9 Plug and connection assignments..............................................
Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB LED bar 5
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present.
Safety instructions WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture.
Safety instructions NOTICE! Fire hazard due to exceedance of the maximum current The device can power other devices of identical construction. The current consumption of all other devices connected in series must not exceed the values indicated in the technical specifications. Otherwise you risk injuries and irreparable damages to the device. Only connect so many identical devices that the maximum current consumption is not exceeded.
Features 3 Features The LED bar is particularly suitable for professional lighting tasks. It's characterized by low power consumption and long service life.
Features n Robust metal housing n optionally available case for four LED bars (item no. 309617) For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings of the bracket provided for mounting.
Installation Please note that this device must not be connected to a dimmer.
Installation Inserting the battery into the remote control Press the lock of the battery holder to the centre of the housing and pull out the battery holder like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing base of the remote control. Slide the battery holder back into the remote until it clicks into place. When shipping, the battery is already installed in the remote and protected against discharge by a transparent plastic foil.
Installation NOTICE! Risk of fire due to incorrect polarity Incorrectly inserted batteries may destroy the device or the batteries. Ensure that proper polarity is observed when inserting batteries. NOTICE! Possible damage by leaking batteries Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a longer period.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Starting up Connections in DMX mode 24 Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).
Starting up DMX indicator If the indicator is flashing in the DMX mode, no DMX signal is received. Maybe the DMX con‐ troller is not switched on or there is a cabling error. If the indicator lights permanently, the device receives a valid DMX signal. Connections in master/slave mode When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately.
Connections and operating elements 6 Connections and operating elements ö $ % *+ MODE SETUP UP DOWN # 26 Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB LED bar &' () DMX IN ö POWER OUT 100-240V~50/60Hz PUSH POWER IN 100-240V~50/60Hz Fuse:T1AL250V , DMX OUT #
Connections and operating elements 1 Locking screws for the mounting bracket 2 Mounting bracket 3 [POWER IN] IEC chassis plug for power supply with fuse holder 4 Display 5 [MODE] Activates the main menu and toggles between menu items. 6 [SETUP] Selects an option of the respective operating mode. 7 [UP] Navigates upwards in a menu list. Increases the displayed value by one. 8 [DOWN] Navigates downwards in a menu list. Decreases the displayed value by one.
Connections and operating elements 9 [DMX IN] DMX input 10 [DMX OUT] DMX output 11 [POWER OUT] IEC chassis socket for the power supply cable to the next unit.
Connections and operating elements IR remote control IR remote control is optional accessory and not included. / 1 3 IR REMOTE ON/OFF AUTO PRG SOUND SPEED STROBE + Dimming – 0 6 R .
Connections and operating elements 12 [AUTO] Enables the Auto mode 13 [PRG] Enables the Programme mode. Select the desired programme with the buttons [+] and [–]. 14 [ON/OFF] Activates / deactivates the device 15 [SPEED] Activates the setting mode for the programme speed. Adjust the speed using the buttons [+] and [–].
Connections and operating elements 19 [–] Decreases the set value by one 20 [Dimming] Enables the dimmer function 21 [0 … 9] Numeric buttons for direct selection of a constant colour.
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. After a few seconds, the display indicates that a reset is in progress. The device is then ready for use. 7.2 Main menu Press [MODE] to activate the main menu and select an operating mode. Use [UP] and [DOWN] to change the respectively displayed value. When the display shows the desired value, press [MODE].
Operating Operating mode ‘Built-in auto‐ matic show’ A built-in automatic show can only be activated when the unit is operating in stand-alone mode or as master in a master / slave combination. This setting is only relevant if the device is not controlled via DMX. Press [MODE] repeatedly until the display shows ‘Prxx’ . Now you can select one of the preprog‐ rammed automatic shows. Use [UP] and [DOWN] to select a value between ‘Pr01’ and ‘Pr21’ .
Operating Display Meaning ‘-rb’ Red and blue ‘rgb’ Red and green and blue ‘ OFF’ LEDs off To adjust the speed of the selected auto show, press [SETUP] repeatedly until the display indi‐ cates ‘SPxx’ . Now use [UP] and [DOWN] to select a value between ‘SP01’ (slow) and ‘SP99’ (fast) or ‘SPFL’ (flash effect). To adjust the flash frequency, press [SETUP] repeatedly until the display shows ‘FSxx’ . Now use [UP] and [DOWN] to select a value between ‘FS00’ (slow) and ‘FS99’ (fast).
Operating Operating mode ‘Automatic’ Automatic operation can only be activated when the unit is operating in stand alone mode or as master in a master / slave combination. This setting is only relevant if the device is not con‐ trolled via DMX. Press [MODE] repeatedly until the display shows ‘Auto’ . To adjust the speed of the automatic mode, press [SETUP] repeatedly until the display shows ‘SPxx’ . Now use [UP] and [DOWN] to select a value between ‘SP01’ (slow) and ‘SP99’ (fast) or ‘SPFL’ (flash effect).
Operating DMX address This setting is only relevant when the device is controlled via DMX. Press [MODE] repeatedly until the display shows ‘dxxx’ . Now you can set the number of the first DMX channel to be used by the device (DMX address). Use [UP] and [DOWN] to select a value between 1 and 512 (display shows ‘d001’ … ‘d512’ ). Make sure that this number matches the configuration of your DMX controller. The following table shows the highest possible first DMX address for the various DMX modes.
Operating DMX mode This setting is only relevant when the device is controlled via DMX. Press [MODE] repeatedly until the display shows ‘dxxx’ . Press [SETUP]. Now use [UP] and [DOWN] to select one of the following DMX operating modes: n n n n ‘2-ch’ (two channels) ‘3-ch’ (three channels) ‘5-ch’ (five channels) ‘24Ch’ (twenty-four channels) Wait about 30 seconds until the display turns dark. Then the settings have been applied. To return to the parent menu without making changes, press [MODE].
Operating Sound control and microphone sensitivity A sound controlled automatic show can only be activated when the unit is operating in stand alone mode or as master in a master / slave combination. This setting is only relevant if the device is not controlled via DMX. Press [MODE] until the display shows ‘SUxx’ . This activates a sound controlled automatic show. Now you can adjust the sensitivity of the built-in microphone for sound control.
Operating Constant unicoloured pattern A constant unicoloured pattern can only be activated when the unit is operating in stand alone mode or as master in a master / slave combination. This setting is only relevant if the device is not controlled via DMX. Press [MODE] repeatedly until the display shows ‘CoLr’ . Press [SETUP].
Operating To adjust the flash frequency, press [SETUP] repeatedly until the display shows ‘FSxx’ . Now use [UP] and [DOWN] to select a value between ‘FS00’ (slow) and ‘FS99’ (fast). Wait about 30 seconds until the display turns dark. Then the settings have been applied. To return to the parent menu without making changes, press [MODE].
Operating 7.
Operating Pr01 Pr19 SP01 FS00 Fd00 SP99 FS99 Fd99 SPFL Pr20 SP01 FS00 Fd00 I__r 2__r Pr21 SP99 FS99 Fd99 1-r9 2-r9 1--9 2--9 1-9b 2-9b 1r9b 2r9b 0FF 0FF SPFL 42 Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB LED bar
Operating 7.
Operating Channel Value Function Channel 1 = 0…63 No function Channel 1 = 64…231 0…255 Increasing speed Channel 1 = 232…255 0…255 44 Sensitivity of the built-in microphone for sound control Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB LED bar
Operating 7.
Operating 7.
Operating 7.7 Functions in 24-channel DMX mode Channel Value Function 1 0…255 Intensity (0 % bis 100 %) of the red LEDs in the 1. Segment 2 0…255 Intensity (0 % bis 100 %) of the green LEDs in the 1. Segment 3 0…255 Intensity (0 % bis 100 %) of the blue LEDs in the 1. Segment 4 0…255 Intensity (0 % bis 100 %) of the red LEDs in the 2. Segment 5 0…255 Intensity (0 % bis 100 %) of the green LEDs in the 2. Segment 6 0…255 Intensity (0 % bis 100 %) of the blue LEDs in the 2.
Operating Channel Value Function 12 0…255 Intensity (0 % bis 100 %) of the blue LEDs in the 4. Segment 13 0…255 Intensity (0 % bis 100 %) of the red LEDs in the 5. Segment 14 0…255 Intensity (0 % bis 100 %) of the green LEDs in the 5. Segment 15 0…255 Intensity (0 % bis 100 %) of the blue LEDs in the 5. Segment 16 0…255 Intensity (0 % bis 100 %) of the red LEDs in the 6. Segment 17 0…255 Intensity (0 % bis 100 %) of the green LEDs in the 6.
Operating Channel Value Function 23 0…255 Intensity (0 % bis 100 %) of the green LEDs in the 8. Segment 24 0…255 Intensity (0 % bis 100 %) of the blue LEDs in the 8.
Technical specifications 8 Technical specifications 88,5 mm 65 mm DMX IN PUSH DMX OUT Power Out 100-240V~50/60Hz Light source Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB (Item no. 460683) (Item no.
Technical specifications Input connections Output connections Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB (Item no. 460683) (Item no.
Technical specifications Weight Ambient conditions 52 Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB LED bar Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB (Item no. 460683) (Item no. 460684) 1.
Technical specifications Further information Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB (Item no. 460683) (Item no.
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
Troubleshooting Symptom Remedy The unit does not work, no light Check the mains connection and the main fuse. No response to the DMX con‐ troller 1. When the display flashes, e.g. ‘d001’ , no valid DMX signal is received. Check whether the DMX controller is switched on. Check the DMX connectors and cables for proper connection. 2. If the display is not flashing but there is still no response, check the address settings and the DMX polarity. 3. Try using another DMX controller. 4.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Protecting the environment Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Notes 60 Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB LED bar
Notes Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB LED bar 61
Notes 62 Giga Bar Pix 8 RGB Giga Bar Frost Pix 8 RGB LED bar
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
