User manual

When the display shows the desired value, press [ENTER] to conrm the selection and then
[MENU] to return to the parent menu.
Press [MENU]. Use [UP] or [DOWN] to select the menu item ‘SLA’ . Press [ENTER]. The display
shows ‘SLAv’ .
Conrm with [ENTER]. The slave device now exactly follows the specications of the master
device. Then press [MENU] to return to the higher-level menu.
Press [MENU]. Use [UP] or [DOWN] to select the menu item ‘SYS’ . Press [ENTER]. Use [UP] or
[DOWN] to select one of the following menu items and then press [ENTER]:
n ‘LEDS’ : Choose between ‘On’ and ‘O’ to turn all LEDs on or o
n ‘vers’
: The display shows the current software version used by the device.
n ‘test’ : A test program is started.
n ‘rESt’
: All device settings are reset.
n
Operating mode ‘Slave’
System menu
Operating
LED Derby ST
33
LED eect