LED Theater Spot 50 3200K, LED Theater Spot 50 3200K WH, User manual LED Theater Spot 50 5600K, LED Theater Spot 50 5600K WH LED spotlight
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 27.01.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of contents 7.6 Functions in 3-channel DMX mode........................................................................................... 41 4 8 Technical specifications....................................................................................................................... 42 9 Plug and connection assignments.................................................................................................. 45 10 Troubleshooting....................................................
LED Theater Spot 50 3200K, LED Theater Spot 50 3200K WH, LED Theater Spot 50 5600K, LED Theater Spot 50 5600K WH LED spotlight 5
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ .
General information Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto]. ð Automatic operation is started. 3. Switch off the device. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present.
Safety instructions WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. Secure the barn door with a safety cable on the spotlight after installation.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’ of this user manual.
Safety instructions NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐ sary, i.e. felt-pad floor protectors or similar.
Features 3 Features The LED theatre spotlight replaces conventional Fresnel lens spotlights with 500 W … 650 W power. Special features of the device: n 1 × COB LED, 50 W n Fresnel lens n Colour temperature: – 3200 K (LED Theater Spot 50 3200K, LED Theater Spot 50 3200K WH) – 5600 K (LED Theater Spot 50 5600K, LED Theater Spot 50 5600K WH) n Colour rendering index: CRI > 90 n Max.
Features For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings of the bracket provided for mounting.
Installation Please note that this device must not be connected to a dimmer.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Starting up Connections in DMX mode 24 Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).
Starting up Connections in master/slave mode When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on.
Connections and controls 6 Connections and controls ö # % ' $ & PUSH ( ) * Menu Up 26 Down Enter LED Theater Spot 50 3200K, LED Theater Spot 50 3200K WH, LED Theater Spot 50 5600K, LED Theater Spot 50 5600K WH LED spotlight
Connections and controls 1 Barn doors for directing the light beam 2 Mounting bracket for hanging or installation and for securing the safety cable 3 DMX input, designed as XLR panel plug, 3-pin 4 DMX output, designed as XLR panel socket, 3-pin 5 Lockable input socket (Power Twist) for powering the device 6 Lockable output socket (Power Twist) for powering another device 7 Locking screw for the mounting bracket 8 Focus control. Adjusts the beam angle in a range from 15° to 45°.
Connections and controls [Up], [Down] Increases / decreases the displayed value by one. [Enter] Confirms a selected value.
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. The device is immediately opera‐ tional and operates in the last mode with the settings last selected. 7.2 Main menu Menu control 1. Press [Menu] to activate the main menu. 2. Use [Up] or [Down] to select the desired parameter or to change the respectively indi‐ cated value. 3.
Operating If you do not press any button for 60 seconds, the display will automatically turn off. Possible changes are not applied.
Operating DMX address 1. Press [Menu] to activate the main menu. 2. Press [Up] or [Down] repeatedly until the display shows ‘DMX’ and confirm with [Enter]. 3. Then use [Up] or [Down] to select a value between ‘001’ and ‘512’ to set the desired DMX address and confirm with [Enter]. 4. To return to the parent menu without changes press [Menu] without prior confirmation. Make sure that this number matches the configuration of your DMX controller.
Operating Dimmer 1. Press [Menu] to activate the main menu. 2. Press [Up] or [Down] repeatedly until the display shows ‘Dim’ and confirm with [Enter]. 3. Use [Up] or [Down] to select a value between ‘000’ and ‘255’ (off … maximum bright‐ ness) to set the dimmer intensity and confirm with [Enter]. 4. To return to the parent menu without changes press [Menu] without prior confirmation. 1. Press [Menu] to activate the main menu. 2.
Operating DMX mode 1. Press [Menu] to activate the main menu. 2. Press [Up] or [Down] repeatedly until the display shows ‘Mode’ and confirm with [Enter]. 3. Use [Up] or [Down] to select one of the three DMX modes ‘1 Ch’ (1 channel mode), ‘2 Ch’ (2 channel mode) or ‘3 Ch’ (3 channel mode) and confirm with [Enter]. 4. To return to the parent menu without changes press [Menu] without prior confirmation.
Operating Pulse-width modulation (PWM) 1. Press [Menu] to activate the main menu. 2. Press [Up] or [Down] repeatedly until the display shows ‘PVM’ and confirm with [Enter]. 3. Use [Up] or [Down] to select one of the following options items and confirm with [Enter]: 4. 34 Display Meaning Display Meaning ‘1’ 1 kHz ‘6’ 5 kHz ‘2’ 2 kHz ‘7’ 6.6 kHz ‘3’ 2.8 kHz ‘8’ 10 kHz ‘4’ 3.
Operating Dimmer curve 1. Press [Menu] to activate the main menu. 2. Press [Up] or [Down] repeatedly until the display shows ‘Curve’ and confirm with [Enter]. 3. Use [Up] or [Down] to select one of the dimmer curves listed below. The dimmer curve determines how the brightness increases or decreases depending on the set DMX value. Confirm with [Enter]. 4. To return to the parent menu without changes press [Menu] without prior confirmation.
Operating The below figure schematically shows the adjustable dimmer curves. Depending on the selected DMX value (1) the device lights with a brightness (2) between 0% and 100%.
Operating Behaviour on DMX control failure 1. Press [Menu] to activate the main menu. 2. Press [Up] or [Down] repeatedly until the display shows ‘Fail’ and confirm with [Enter]. 3. Use [Up] or [Down] to select one of the following options items and confirm with [Enter]. 4.
Operating System information 1. Press [Menu] to activate the main menu. 2. Press [Up] or [Down] repeatedly until the display shows ‘Info’ and confirm with [Enter]. 3. Use [Up] or [Down] to select the desired information to be displayed and confirm with [Enter]. 4. Operating mode Slave 38 Display Meaning ‘Ver’ displays the current software version. ‘Hrs’ displays the total running time of the LED. To return to the parent menu without changes press [Menu] without prior confirmation.
Operating 7.
Operating 7.4 Functions in 1-channel DMX mode Channel Value Function 1 0 … 255 Master dimmer (0 % to 100 %) 7.
Operating 7.
Technical specifications 8 Technical specifications 135 mm Light source 1 × COB LED, 50 W Light source properties Colour temperature 5600 K (item no.
Technical specifications Output connections Voltage supply further devices lockable output socket (Power Twist) DMX control XLR chassis socket, 3-pin Power consumption max.
Technical specifications Further information Optic Fresnel Fanless no motorized zoom no Housing colour Item no. 495875, 515641: black Item no.
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
Troubleshooting Symptom Remedy The unit does not work, no light. Check the mains connection and the fuse. No response to the DMX con‐ troller. 1. Check the DMX ports and cables for proper connection. 2. Check the address settings and the DMX polarity. 3. Try using another DMX controller. 4. Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interfer‐ ence to DMX interface circuits.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes 50 LED Theater Spot 50 3200K, LED Theater Spot 50 3200K WH, LED Theater Spot 50 5600K, LED Theater Spot 50 5600K WH LED spotlight
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
