i |. Welcome Thank you for purchasing the INFO-20 belt 3D printer from SairSmart. This user manual is designed to aid INFO-20 belt 3D printer users to assemble and use their new printer.
l Contents L Welcome sv ode sid SR PE PTs RE ns KES EE 1 IL Notice “iii iid ides Ii), Part Ust ¥ ©aadbmmmiiibdd 3 a Bas sw ow woe mn wom ow spacewomen § IV. Printer Components oda aie ahs § Printer Parameters GSS ed edd sda duos 6 VE Installation Instructions» miniseries china Introductions ass sss vv 88 ve nemesis es 9 Ill, Loading Filament # sds nas as wns dBi Nina sin i po bs Leveling mnmsssmmsmrmsm air swe vam wall pax Wi X. Printing Your Own Models +» Xi.
ll: Notice 1. Do not try to use the machine in @ny way that is not described in use, so as to avoid accidental personal injury and property loss. 2. Please keep the machine away from flammable, explosive, corrosive, or high heat sources. Please place the machine In a ventilated and cool environment. 3. Place the machine on 2 level and stable surface. Unnecessary vibration or shake ing will affect print results. 4, This machine is compatible with 1.75mm filaments such as PLA, TPU, PET. 5.
| Il. Part List Before you get started check that your package has-all of the included accessories: {0 1x XY Axis Silt Assembly 12) 1.x: Bottom Belt Assembly E11 x Spool Holder @ x Profile Bracket? {0 1x Profile Bracket? GUL x Yo axis Finding Plate 1 0 Alexis Fixing Plate 2 Cassowary Tool List SD 5-00 Annual 1 x Power Cord $i TF Card and Reader Scopes Cable 1x Scraper 1x Nozzle 0.
IV. Printer Components 1.Bed Leveling Nut 4.Control Knoll 7. Extruder Motor 13.Belt Pensioning Screw 15.Power Switch.and Socket 2.1CD Screen 3TF Card 5.Filament Sensor Motor 8.Belt Platform 9 Voltage Selector nozzle Kit Belt Motor 14.
l V. Printer Parameters Model Info-20 Print size 200 x 180 noo mm Molding technology FDM Number of nozzles 1 Layer height 0:3:04mm Nozzle diameter 04mm Printing accuracy 0.1mm Materials PLA / PET File types STL OBI J AME Printing mode $0 Card Offline Printing / WIFI Slicer Smartness Slicer Max.
l Installation Instructions 1. Fix profile bracket 1 and 2 with hexagon socket flat round head screw M5x8. {Lock the front first, then the side) Ze 1) 1.x Bottom Belt Assembly ni 2) Ly Profile Bracket 1 3) Lx Profile Bracket Hexagon Socket Flat Round Head Screw MS5x8 2. Fix X/Y axis assembly with hexagon socket head spring washer combination screw MSx40 and hexagon socket flat round head screw M5x8.
3. Insert'the positioning pin on the Y-axis fixed plate into the corresponding hole of the aluminum profile, and then lock it with hexagon socket flat round head screw M5x8. (911 w Profile Bracket 2 ey 4010 Hexagon Socket Flat Round Head Screw M5x8 4.Cable Connection: @) Insert the Teflon tube into connector. {Also insert'the black clamp.) @ Connect the filament sensor cable, @ Connect machine base cable. @ Connect the extrude motor cable. Connect power cable. ® Install the spool holder.
| Connect E Motor Cable Install the Spool Holder ; Vil Menu Introduction Print Select Print File > Prepare ~~ preheat
Prepare — =b Layer Test ca » © Prepare = « == Change Filament » Move ~~ ~» Axis Control & Home a About — -» Machine Information
Step 1. Navigate to “Preheat” in “Prepare” menu and setyournozele temperature and bed temp to the appropriate settings for our filament: Step 2. Place our spool onto the filament holder Step 3. Insert the filament into the filament detector sensor. Step 4. Press down on the stepper motor filament lever to insert filament passed the sensor and into the bowmen tube. Step 5. Feed filament through until vou see some plastic begin to intruder from the nozzle. ! IX. Leveling 1..
2. Adjust the height of your belt. Step 1. Navigate to the “Prepare” menu. Step 2. Select “Layer test” function. After waiting for the nozzle to heat up, nozzle will keep moving and extruding out filament to help you adjust the distance between the nozzle and the belt, Step B. Adjust the height of your belt to make sure the filament is extruded fully and evenly, so that your print can be well adhered to the platform. Platform Adjustment Nuts Counter Clockwise to “RAISE” the platform.
4, Home the printer and adjust the screws in the Y-axis limit switch to make sure a proper distance between the nozzle and the platform. {Use the 0.1mm feeler gauge to assist.) 5. To make sure the nozzle is at the correct height above the platform: First, loosen two fixing screws at the end stop, then turn the bottom adjusting screw to adjust the height of the end stop, turn clockwise to move the noontide closer to the platform and vice versa.
6. Turn'the four platform adjustment nuts counterclockwise to lift the platform. All ruts should be adjusted, gate rotation should be less than 180°, Use the feeler gauge to test the distance between the nozzle and the platform, Platform Adjustment Nuts 7..Check the leveling again with the “Layer test” function, if you still find the nozzle is too far from the platform, repeat step 6 until you get a satisfactory extrusion result.
) X. Writing Your Own Models uninstalling Software @) Check your accessories box for the included SD card. (@ Install the smartness belt 3D printer slicer software. (3) Import the included machine and filament print profiles. hin has i chine Satinwoods CE Sir pba , Mach niches . Wunderkind Sle Lids 2.Print from SD Card (D-Copy the geode file generated to memory card, @ Insert the included SD card into the micro SD card slot near the top of the controller display unit at the top of your 3D printer.
) Xl. WiFi Configuration Note: Before enabling WiFi on your INFO-20, please note‘that the INFO-20 only supports 2.4GHz WiFi, not GHz. If your router has these two bands combined, please separate them. sp that the INFO-20 can recognize your WiFi network. In addition, donor use the same SAID for your 2.4 GHz WiFi and GHz WiFi. 1.
3, Open the browser, navigate to the IP address displayed. FREE Notes: If no IP address is displayed, 1. Please repeat step. 2. Make sure the password you entered is correct. 3. Make sure you have a stable wife connection.
If you need any assistance, please contact us via; Email; £ Facebook messenger: Bs Zi www.sainsmart.
