Owner`s manual

99
To adjust height, pull both shoulder belts
towards rear through slots. Then guide belts
through slots in required position.
Fastening in the vehicle
Raise carrying handle of safety cradle. Plac e
safety cradle on sea t, with belted c hild facing
away f rom the direction of travel.
Move upper anchorage point of ve hicle se at
belt to lowest position – see page 82.
Pull ve hicle seat belt out o f r etrac tor and r ou te
lap be lt t hrough the two guide clips on the
side bolsters of the safety cradle.
Fasten belt buckle.
Open clip on rear of safety cradle to side.
Route the diagonal part of the vehicle sea t
belt arou nd the ba ck of the safety cradle
backrest through the open clip. Tighten
vehicle seat be lt an d close clip.
To disengage carrying handle, press down
and swivel in direction of vehic le seat
backrest.